On this page:
make-contract
make-chaperone-contract
make-flat-contract
build-compound-type-name
coerce-contract
coerce-contracts
coerce-chaperone-contract
coerce-chaperone-contracts
coerce-flat-contract
coerce-flat-contracts
coerce-contract/ f
7.5.1 Blame Objects
blame?
blame-positive
blame-negative
blame-contract
blame-value
blame-source
blame-swap
blame-original?
blame-swapped?
raise-blame-error
exn: fail: contract: blame?
exn: fail: contract: blame-object
7.5.2 Contracts as structs
prop: contract
prop: chaperone-contract
prop: flat-contract
build-flat-contract-property
build-chaperone-contract-property
build-contract-property
contract-property?
chaperone-contract-property?
flat-contract-property?
7.5.3 Obligation Information in Check Syntax

7.5 Building New Contract Combinators

Note: The interface in this section is unstable and subject to change.

Contracts are represented internally as functions that accept information about the contract (who is to blame, source locations, etc) and produce projections (in the spirit of Dana Scott) that enforce the contract. A projection is a function that accepts an arbitrary value, and returns a value that satisfies the corresponding contract. For example, a projection that accepts only integers corresponds to the contract (flat-contract integer?), and can be written like this:

  (define int-proj
    (lambda (x)
      (if (integer? x)
          x
          (signal-contract-violation))))

As a second example, a projection that accepts unary functions on integers looks like this:

  (define int->int-proj
    (lambda (f)
      (if (and (procedure? f)
               (procedure-arity-includes? f 1))
          (lambda (x)
            (int-proj (f (int-proj x))))
          (signal-contract-violation))))

Although these projections have the right error behavior, they are not quite ready for use as contracts, because they do not accomodate blame, and do not provide good error messages. In order to accomodate these, contracts do not just use simple projections, but use functions that accept a blame object encapsulating the names of two parties that are the candidates for blame, as well as a record of the source location where the contract was established and the name of the contract. They can then, in turn, pass that information to raise-blame-error to signal a good error message.

Here is the first of those two projections, rewritten for use in the contract system:
  (define (int-proj blame)
    (lambda (x)
      (if (integer? x)
          x
          (raise-blame-error
           blame
           val
           "expected <integer>, given: ~e"
           val))))
The new argument specifies who is to be blamed for positive and negative contract violations.

Contracts, in this system, are always established between two parties. One party provides some value according to the contract, and the other consumes the value, also according to the contract. The first is called the “positive” person and the second the “negative”. So, in the case of just the integer contract, the only thing that can go wrong is that the value provided is not an integer. Thus, only the positive party can ever accrue blame. The raise-blame-error function always blames the positive party.

Compare that to the projection for our function contract:

  (define (int->int-proj blame)
    (let ([dom (int-proj (blame-swap blame))]
          [rng (int-proj blame)])
      (lambda (f)
        (if (and (procedure? f)
                 (procedure-arity-includes? f 1))
            (lambda (x)
              (rng (f (dom x))))
            (raise-blame-error
             blame
             val
             "expected a procedure of one argument, given: ~e"
             val)))))

In this case, the only explicit blame covers the situation where either a non-procedure is supplied to the contract, or where the procedure does not accept one argument. As with the integer projection, the blame here also lies with the producer of the value, which is why raise-blame-error is passed blame unchanged.

The checking for the domain and range are delegated to the int-proj function, which is supplied its arguments in the first two line of the int->int-proj function. The trick here is that, even though the int->int-proj function always blames what it sees as positive we can swap the blame parties by calling blame-swap on the given blame object, replacing the positive party with the negative party and vice versa.

This is not just a cheap trick to get this example to work, however. The reversal of the positive and the negative is a natural consequence of the way functions behave. That is, imagine the flow of values in a program between two modules. First, one module defines a function, and then that module is required by another. So, far the function itself has to go from the original, providing module to the requiring module. Now, imagine that the providing module invokes the function, suppying it an argument. At this point, the flow of values reverses. The argument is travelling back from the requiring module to the providing module! And finally, when the function produces a result, that result flows back in the original direction. Accordingly, the contract on the domain reverses the positive and the negative blame parties, just like the flow of values reverses.

We can use this insight to generalize the function contracts and build a function that accepts any two contracts and returns a contract for functions between them.

  (define (make-simple-function-contract dom-proj range-proj)
    (lambda (blame)
      (let ([dom (dom-proj (blame-swap blame))]
            [rng (range-proj blame)])
        (lambda (f)
          (if (and (procedure? f)
                   (procedure-arity-includes? f 1))
              (lambda (x)
                (rng (f (dom x))))
              (raise-blame-error
               blame
               val
               "expected a procedure of one argument, given: ~e"
               val))))))

Projections like the ones described above, but suited to other, new kinds of value you might make, can be used with the contract library primitives below.

(make-contract [#:name name    
  #:first-order test    
  #:projection proj])  contract?
  name : any/c = 'anonymous-contract
  test : (-> any/c any/c) = (λ (x) #t)
  proj : (-> blame? (-> any/c any/c))
   = 
(λ (b)
  (λ (x)
    (if (test x)
      x
      (raise-blame-error
       b x "expected <~a>, given: ~e" name x))))
(make-chaperone-contract [#:name name 
  #:first-order test 
  #:projection proj]) 
  chaperone-contract?
  name : any/c = 'anonymous-chaperone-contract
  test : (-> any/c any/c) = (λ (x) #t)
  proj : (-> blame? (-> any/c any/c))
   = 
(λ (b)
  (λ (x)
    (if (test x)
      x
      (raise-blame-error
       b x "expected <~a>, given: ~e" name x))))
(make-flat-contract [#:name name    
  #:first-order test    
  #:projection proj])  flat-contract?
  name : any/c = 'anonymous-flat-contract
  test : (-> any/c any/c) = (λ (x) #t)
  proj : (-> blame? (-> any/c any/c))
   = 
(λ (b)
  (λ (x)
    (if (test x)
      x
      (raise-blame-error
       b x "expected <~a>, given: ~e" name x))))
These functions build simple higher-order contracts, chaperone contracts, and flat contracts, respectively. They both take the same set of three optional arguments: a name, a first order predicate, and a blame-tracking projection.

The name argument is any value to be rendered using display to describe the contract when a violation occurs. The default name for simple higher order contracts is anonymous-contract, for chaperone contracts is anonymous-chaperone-contract, and for flat contracts is anonymous-flat-contract.

The first order predicate test can be used to determine which values the contract applies to; usually this is the set of values for which the contract fails immediately without any higher-order wrapping. This test is used by contract-first-order-passes?, and indirectly by or/c to determine which of multiple higher order contracts to wrap a value with. The default test accepts any value.

The projection proj defines the behavior of applying the contract. It is a curried function of two arguments: the first application accepts a blame object, and the second accepts a value to protect with the contract. The projection must either produce the value, suitably wrapped to enforce any higher-order aspects of the contract, or signal a contract violation using raise-blame-error. The default projection produces an error when the first order test fails, and produces the value unchanged otherwise.

Projections for chaperone contracts must produce a value that passes chaperone-of? when compared with the original, uncontracted value. Projections for flat contracts must fail precisely when the first order test does, and must produce the input value unchanged otherwise. Applying a flat contract may result in either an application of the predicate, or the projection, or both; therefore, the two must be consistent. The existence of a separate projection only serves to provide more specific error messages. Most flat contracts do not need to supply an explicit projection.

Examples:

  (define int/c
    (make-flat-contract #:name 'int/c #:first-order integer?))
  > (contract int/c 1 'positive 'negative)

  1

  > (contract int/c "not one" 'positive 'negative)

  positive broke the contract int/c on eval:4:0; expected

  <int/c>, given: "not one"

  > (int/c 1)

  #t

  > (int/c "not one")

  #f

  (define int->int/c
    (make-contract
     #:name 'int->int/c
     #:first-order
     (λ (x) (and (procedure? x) (procedure-arity-includes? x 1)))
     #:projection
     (λ (b)
       (let ([domain ((contract-projection int/c) (blame-swap b))]
             [range ((contract-projection int/c) b)])
         (λ (f)
           (if (and (procedure? f) (procedure-arity-includes? f 1))
             (λ (x) (range (f (domain x))))
             (raise-blame-error
              b f
              "expected a function of one argument, got: ~e"
              f)))))))
  > (contract int->int/c "not fun" 'positive 'negative)

  positive broke the contract int->int/c on eval:8:0;

  expected a function of one argument, got: "not fun"

  (define halve
    (contract int->int/c (λ (x) (/ x 2)) 'positive 'negative))
  > (halve 2)

  1

  > (halve 1/2)

  negative broke the contract int->int/c on halve given to

  top-level; expected <int/c>, given: 1/2

  > (halve 1)

  positive broke the contract int->int/c on halve; expected

  <int/c>, given: 1/2

(build-compound-type-name c/s ...)  any
  c/s : any/c
Produces an S-expression to be used as a name for a contract. The arguments should be either contracts or symbols. It wraps parenthesis around its arguments and extracts the names from any contracts it is supplied with.

(coerce-contract id x)  contract?
  id : symbol?
  x : any/c
Converts a regular racket value into an instance of a contract struct, converting it according to the description of contracts.

If x is not one of the coercable values, coerce-contract signals an error, using the first argument in the error message.

(coerce-contracts id xs)  (listof contract?)
  id : symbol?
  xs : (listof any/c)
Coerces all of the arguments in ’xs’ into contracts (via coerce-contract/f) and signals an error if any of them are not contracts. The error messages assume that the function named by id got xs as its entire argument list.

Like coerce-contract, but requires the result to be a chaperone contract, not an arbitrary contract.

(coerce-chaperone-contracts id x)
  (listof/c chaperone-contract?)
  id : symbol?
  x : (listof any/c)
Like coerce-contracts, but requires the results to be chaperone contracts, not arbitrary contracts.

(coerce-flat-contract id x)  flat-contract?
  id : symbol?
  x : any/c
Like coerce-contract, but requires the result to be a flat contract, not an arbitrary contract.

(coerce-flat-contracts id x)  (listof/c flat-contract?)
  id : symbol?
  x : (listof any/c)
Like coerce-contracts, but requires the results to be flat contracts, not arbitrary contracts.

(coerce-contract/f x)  (or/c contract? #f)
  x : any/c
Like coerce-contract, but returns #f if the value cannot be coerced to a contract.

7.5.1 Blame Objects

(blame? x)  boolean?
  x : any/c
This predicate recognizes blame objects.

(blame-positive b)  any/c
  b : blame?
(blame-negative b)  any/c
  b : blame?
These functions produce printable descriptions of the current positive and negative parties of a blame object.

(blame-contract b)  any/c
  b : blame?
This function produces a description of the contract associated with a blame object (the result of contract-name).

(blame-value b)  any/c
  b : blame?
This function produces the name of the value to which the contract was applied, or #f if no name was provided.

(blame-source b)  srcloc?
  b : blame?
This function produces the source location associated with a contract. If no source location was provided, all fields of the structure will contain #f.

(blame-swap b)  blame?
  b : blame?
This function swaps the positive and negative parties of a blame object.

(blame-original? b)  boolean?
  b : blame?
(blame-swapped? b)  boolean?
  b : blame?
These functions report whether the current blame of a given blame object is the same as in the original contract invocation (possibly of a compound contract containing the current one), or swapped, respectively. Each is the negation of the other; both are provided for convenience and clarity.

(raise-blame-error b x fmt v ...)  none/c
  b : blame?
  x : any/c
  fmt : string?
  v : any/c
Signals a contract violation. The first argument, b, records the current blame information, including positive and negative parties, the name of the contract, the name of the value, and the source location of the contract application. The second argument, x, is the value that failed to satisfy the contract. The remaining arguments are a format string, fmt, and its arguments, v ..., specifying an error message specific to the precise violation.

This predicate recognizes exceptions raised by raise-blame-error.

This accessor extracts the blame object associated with a contract violation.

7.5.2 Contracts as structs

Note: The interface in this section is unstable and subject to change.

The property prop:contract allows arbitrary structures to act as contracts. The property prop:chaperone-contract allows arbitrary structures to act as chaperone contracts; prop:chaperone-contract inherits prop:contract, so chaperone contract structures may also act as general contracts. The property prop:flat-contract allows arbitrary structures to act as flat contracts; prop:flat-contract inherits both prop:chaperone-contract and prop:procedure, so flat contract structures may also act as chaperone contracts, as general contracts, and as predicate procedures.

These properties declare structures to be contracts or flat contracts, respectively. The value for prop:contract must be a contract property constructed by build-contract-property; likewise, the value for prop:chaperone-contract must be a chaperone contract property constructed by build-chaperone-contract-property and the value for prop:flat-contract must be a flat contract property constructed by build-flat-contract-property.

(build-flat-contract-property [#:name get-name 
  #:first-order get-first-order 
  #:projection get-projection 
  #:stronger stronger 
  #:generator generator]) 
  flat-contract-property?
  get-name : (-> contract? any/c)
   = (λ (c) 'anonymous-flat-contract)
  get-first-order : (-> contract? (-> any/c boolean?))
   = (λ (c) (λ (x) #t))
  get-projection : (-> contract? (-> blame? (-> any/c any/c)))
   = 
(λ (c)
  (λ (b)
    (λ (x)
      (if ((get-first-order c) x)
        x
        (raise-blame-error
         b x "expected <~a>, given: ~e" (get-name c) x)))))
  stronger : (or/c (-> contract? contract? boolean?) #f) = #f
  generator : (or/c (-> number? (listof (list any/c contract?)) any/c) #f)
   = #f
(build-chaperone-contract-property 
  [#:name get-name 
  #:first-order get-first-order 
  #:projection get-projection 
  #:stronger stronger 
  #:generator generator]) 
  chaperone-contract-property?
  get-name : (-> contract? any/c)
   = (λ (c) 'anonymous-chaperone-contract)
  get-first-order : (-> contract? (-> any/c boolean?))
   = (λ (c) (λ (x) #t))
  get-projection : (-> contract? (-> blame? (-> any/c any/c)))
   = 
(λ (c)
  (λ (b)
    (λ (x)
      (if ((get-first-order c) x)
        x
        (raise-blame-error
         b x "expected <~a>, given: ~e" (get-name c) x)))))
  stronger : (or/c (-> contract? contract? boolean?) #f) = #f
  generator : (or/c (-> number? (listof (list any/c contract?)) any/c) #f)
   = #f
(build-contract-property [#:name get-name 
  #:first-order get-first-order 
  #:projection get-projection 
  #:stronger stronger 
  #:generator generator]) 
  contract-property?
  get-name : (-> contract? any/c) = (λ (c) 'anonymous-contract)
  get-first-order : (-> contract? (-> any/c boolean?))
   = (λ (c) (λ (x) #t))
  get-projection : (-> contract? (-> blame? (-> any/c any/c)))
   = 
(λ (c)
  (λ (b)
    (λ (x)
      (if ((get-first-order c) x)
        x
        (raise-blame-error
         b x "expected <~a>, given: ~e" (get-name c) x)))))
  stronger : (or/c (-> contract? contract? boolean?) #f) = #f
  generator : (or/c (-> number? (listof (list any/c contract?)) any/c) #f)
   = #f
These functions build the arguments for prop:contract, prop:chaperone-contract, and prop:flat-contract, respectively.

A contract property specifies the behavior of a structure when used as a contract. It is specified in terms of five accessors: get-name, which produces a description to write as part of a contract violation; get-first-order, which produces a first order predicate to be used by contract-first-order-passes?; get-projection, which produces a blame-tracking projection defining the behavior of the contract; stronger, which is a predicate that determines if one contract this contract (passed in the first argument) is stronger than some other contract (passed in the second argument); and generator, which makes a random value that matches the contract, given a size bound and an environment from which to draw interesting values.

These accessors are passed as (optional) keyword arguments to build-contract-property, and are applied to instances of the appropriate structure type by the contract system. Their results are used analogously to the arguments of make-contract.

A chaperone contract property specifies the behavior of a structure when used as a chaperone contract. It is specified using build-chaperone-contract-property, and accepts exactly the same set of arguments as build-contract-property. The only difference is that the projection accessor must return a value that passes chaperone-of? when compared with the original, uncontracted value.

A flat contract property specifies the behavior of a structure when used as a flat contract. It is specified using build-flat-contract-property, and accepts exactly the same set of arguments as build-contract-property. The only difference is that the projection accessor is expected not to wrap its argument in a higher order fashion, analogous to the constraint on projections in make-flat-contract.

These predicates detect whether a value is a contract property, chaperone contract property, or a flat contract property, respectively.

7.5.3 Obligation Information in Check Syntax

Check Syntax in DrRacket shows obligations information for contracts according to syntax-propertys that the contract combinators leave in the expanded form of the program. These properties indicate where contracts appears in the source and where the positive and negative positions of the contracts appear.

To make Check Syntax show obligation information for your new contract combinators, use these properties: