On this page:
set!-transformer?
make-set!-transformer
set!-transformer-procedure
prop: set!-transformer
rename-transformer?
make-rename-transformer
rename-transformer-target
prop: rename-transformer
local-expand
syntax-local-expand-expression
local-transformer-expand
local-expand/ capture-lifts
local-transformer-expand/ capture-lifts
internal-definition-context?
syntax-local-make-definition-context
syntax-local-bind-syntaxes
internal-definition-context-seal
identifier-remove-from-definition-context
syntax-local-value
syntax-local-value/ immediate
syntax-local-lift-expression
syntax-local-lift-values-expression
syntax-local-lift-context
syntax-local-lift-module-end-declaration
syntax-local-lift-require
syntax-local-lift-provide
syntax-local-name
syntax-local-context
syntax-local-phase-level
syntax-local-module-exports
syntax-local-get-shadower
syntax-local-armer
syntax-local-certifier
syntax-transforming?
syntax-local-introduce
make-syntax-introducer
make-syntax-delta-introducer
syntax-local-make-delta-introducer
syntax-local-transforming-module-provides?
syntax-local-module-defined-identifiers
syntax-local-module-required-identifiers
11.4.1 require Transformers
expand-import
make-require-transformer
prop: require-transformer
require-transformer?
import
import-source
syntax-local-require-certifier
11.4.2 provide Transformers
expand-export
make-provide-transformer
prop: provide-transformer
provide-transformer?
export
syntax-local-provide-certifier

11.4 Syntax Transformers

(set!-transformer? v)  boolean?
  v : any/c
Returns #t if v is a value created by make-set!-transformer or an instance of a structure type with the prop:set!-transformer property, #f otherwise.

(make-set!-transformer proc)  set!-transformer?
  proc : (syntax? . -> . syntax?)
Creates an assignment transformer that cooperates with set!. If the result of make-set!-transformer is bound to id as a transformer binding, then proc is applied as a transformer when id is used in an expression position, or when it is used as the target of a set! assignment as (set! id expr). When the identifier appears as a set! target, the entire set! expression is provided to the transformer.

Example:

> (let ([x 1]
        [y 2])
    (let-syntax ([x (make-set!-transformer
                      (lambda (stx)
                        (syntax-case stx (set!)
                          ; Redirect mutation of x to y
                          [(set! id v) #'(set! y v)]
                          ; Normal use of x really gets x
                          [id (identifier? #'id)  #'x])))])
      (begin
        (set! x 3)
        (list x y))))

'(1 3)

(set!-transformer-procedure transformer)
  (syntax? . -> . syntax?)
  transformer : set!-transformer?
Returns the procedure that was passed to make-set!-transformer to create transformer or that is identified by the prop:set!-transformer property of transformer.

A structure type property to identify structure types that act as assignment transformers like the ones created by make-set!-transformer.

The property value must be an exact integer or procedure of one or two arguments. In the former case, the integer designates a field within the structure that should contain a procedure; the integer must be between 0 (inclusive) and the number of non-automatic fields in the structure type (exclusive, not counting supertype fields), and the designated field must also be specified as immutable.

If the property value is a procedure of one argument, then the procedure serves as a syntax transformer and for set! transformations. If the property value is a procedure of two arguments, then the first argument is the structure whose type has prop:set!-transformer property, and the second argument is a syntax object as for a syntax transformer and for set! transformations; set!-transformer-procedure applied to the structure produces a new function that accepts just the syntax object and calls the procedure associated through the property. Finally, if the property value is an integer, the target identifier is extracted from the structure instance; if the field value is not a procedure of one argument, then a procedure that always calls raise-syntax-error is used, instead.

If a value has both the prop:set!-transformer and prop:rename-transformer properties, then the latter takes precedence. If a structure type has the prop:set!-transformer and prop:procedure properties, then the former takes precedence for the purposes of macro expansion.

(rename-transformer? v)  boolean?
  v : any/c
Returns #t if v is a value created by make-rename-transformer or an instance of a structure type with the prop:rename-transformer property, #f otherwise.

(make-rename-transformer id-stx    
  [delta-introduce])  rename-transformer?
  id-stx : syntax?
  delta-introduce : (identifier? . -> . identifier?)
   = (lambda (id) id)
Creates a rename transformer that, when used as a transformer binding, acts as a transformer that inserts the identifier id-stx in place of whatever identifier binds the transformer, including in non-application positions, in set! expressions.

Such a transformer could be written manually, but the one created by make-rename-transformer triggers special cooperation with the parser and other syntactic forms when id is bound to the rename transformer:

(rename-transformer-target transformer)  identifier?
  transformer : rename-transformer?
Returns the identifier passed to make-rename-transformer to create transformer or as indicated by a prop:rename-transformer property on transformer.

A structure type property to identify structure types that act as rename transformers like the ones created by make-rename-transformer.

The property value must be an exact integer or an identifier syntax object. In the former case, the integer designates a field within the structure that should contain an identifier; the integer must be between 0 (inclusive) and the number of non-automatic fields in the structure type (exclusive, not counting supertype fields), and the designated field must also be specified as immutable.

If the property value is an identifier, the identifier serves as the target for renaming, just like the first argument to make-rename-transformer. If the property value is an integer, the target identifier is extracted from the structure instance; if the field value is not an identifier, then an identifier ? with an empty context is used, instead.

(local-expand stx    
  context-v    
  stop-ids    
  [intdef-ctx])  syntax?
  stx : syntax?
  context-v : (or/c 'expression 'top-level 'module 'module-begin list?)
  stop-ids : (or/c (listof identifier?) #f)
  intdef-ctx : 
(or/c internal-definition-context?
      (and/c pair?
             (listof internal-definition-context?))
      #f)
   = #f
Expands stx in the lexical context of the expression currently being expanded. The context-v argument is used as the result of syntax-local-context for immediate expansions; for a particular internal-definition context, generate a unique value and cons it onto the current result of syntax-local-context if it is a list.

When an identifier in stop-ids is encountered by the expander in a sub-expression, expansions stops for the sub-expression. If stop-ids is a non-empty list, then begin, quote, set!, lambda, case-lambda, let-values, letrec-values, if, begin0, with-continuation-mark, letrec-syntaxes+values, #%app, #%expression, #%top, and #%variable-reference are added to stop-ids. If #%app, #%top, or #%datum appears in stop-ids, then application, top-level variable reference, and literal data expressions without the respective explicit form are not wrapped with the explicit form. If stop-ids is #f instead of a list, then stx is expanded only as long as the outermost form of stx is a macro (i.e., expansion does not proceed to sub-expressions). A fully expanded form can include the bindings listed in Fully Expanded Programs plus the letrec-syntaxes+values form.

The optional intdef-ctx argument must be either #f, the result of syntax-local-make-definition-context, or a list of such results. In the latter two cases, lexical information for internal definitions is added to stx before it is expanded (in reverse order relative to the list). The lexical information is also added to the expansion result (because the expansion might introduce bindings or references to internal-definition bindings).

This procedure must be called during the dynamic extent of a syntax transformer application by the expander or while a module is visited, otherwise the exn:fail:contract exception is raised.

Examples:

> (define-syntax do-print
    (syntax-rules ()
      [(_ x ...) (printf x ...)]))
> (define-syntax hello
    (syntax-rules ()
      [(_ x) (do-print "hello ~a" x)]))
> (define-syntax (show stx)
    (syntax-case stx ()
      [(_ x)
       (with-syntax ([partly-expanded (local-expand #'(hello x)
                                                    'expression
                                                    (list #'do-print))]
                     [expanded (local-expand #'(hello x)
                                             'expression
                                             #f)])
         (printf "partly expanded syntax is ~a\n" (syntax->datum #'partly-expanded))
         (printf "expanded syntax is ~a\n" (syntax->datum #'expanded))
         #'expanded)]))
> (show 1)

partly expanded syntax is (do-print hello ~a 1)

expanded syntax is (printf hello ~a 1)

hello 1

Like local-expand given 'expression and an empty stop list, but with two results: a syntax object for the fully expanded expression, and a syntax object whose content is opaque. The latter can be used in place of the former (perhaps in a larger expression produced by a macro transformer), and when the macro expander encounters the opaque object, it substitutes the fully expanded expression without re-expanding it; the exn:fail:syntax exception is raised if the expansion context includes bindings or marks that were not present for the original expansion, in which case re-expansion might produce different results. Consistent use of syntax-local-expand-expression and the opaque object thus avoids quadratic expansion times when local expansions are nested.

This procedure must be called during the dynamic extent of a syntax transformer application by the expander or while a module is visited, otherwise the exn:fail:contract exception is raised.

(local-transformer-expand stx    
  context-v    
  stop-ids    
  [intdef-ctx])  syntax?
  stx : syntax?
  context-v : (or/c 'expression 'top-level 'module 'module-begin list?)
  stop-ids : (or/c (listof identifier?) #f)
  intdef-ctx : (or/c internal-definition-context? #f) = #f
Like local-expand, but stx is expanded as a transformer expression instead of a run-time expression, and any lifted expressions—from calls to syntax-local-lift-expression during the expansion of stxare captured into a let-values form in the result.

(local-expand/capture-lifts stx    
  context-v    
  stop-ids    
  [intdef-ctx    
  lift-ctx])  syntax?
  stx : syntax?
  context-v : (or/c 'expression 'top-level 'module 'module-begin list?)
  stop-ids : (or/c (listof identifier?) #f)
  intdef-ctx : (or/c internal-definition-context? #f) = #f
  lift-ctx : any/c = (gensym 'lifts)
Like local-expand, but the result is a syntax object that represents a begin expression. Lifted expressions—from calls to syntax-local-lift-expression during the expansion of stxappear with their identifiers in define-values forms, and the expansion of stx is the last expression in the begin. The lift-ctx value is reported by syntax-local-lift-context during local expansion. The lifted expressions are not expanded, but instead left as provided in the begin form.

(local-transformer-expand/capture-lifts stx    
  context-v    
  stop-ids    
  [intdef-ctx])  syntax?
  stx : syntax?
  context-v : (or/c 'expression 'top-level 'module 'module-begin list?)
  stop-ids : (or/c (listof identifier?) #f)
  intdef-ctx : (or/c internal-definition-context? #f) = #f
Like local-expand/capture-lifts, but stx is expanded as a transformer expression instead of a run-time expression. Lifted expressions are reported as define-values forms (in the transformer environment).

Returns #t if v is an internal-definition context, #f otherwise.

Creates an opaque internal-definition context value to be used with local-expand and other functions. A transformer should create one context for each set of internal definitions to be expanded, and use it when expanding any form whose lexical context should include the definitions. After discovering an internal define-values or define-syntaxes form, use syntax-local-bind-syntaxes to add bindings to the context. Finally, the transformer must call internal-definition-context-seal after all bindings have been added; if an unsealed internal-definition context is detected in a fully expanded expression, the exn:fail:contract exception is raised.

If intdef-ctx is not #f, then the new internal-definition context extends the given one. That is, expanding in the new internal-definition context can use bindings previously introduced into intdef-ctx.

This procedure must be called during the dynamic extent of a syntax transformer application by the expander or while a module is visited, otherwise the exn:fail:contract exception is raised.

(syntax-local-bind-syntaxes id-list    
  expr    
  intdef-ctx)  void?
  id-list : (listof identifier?)
  expr : (or/c syntax? #f)
  intdef-ctx : internal-definition-context?
Binds each identifier in id-list within the internal-definition context represented by intdef-ctx, where intdef-ctx is the result of syntax-local-make-definition-context. Supply #f for expr when the identifiers correspond to define-values bindings, and supply a compile-time expression when the identifiers correspond to define-syntaxes bindings; in the latter case, the number of values produced by the expression should match the number of identifiers, otherwise the exn:fail:contract:arity exception is raised.

This procedure must be called during the dynamic extent of a syntax transformer application by the expander or while a module is visited, otherwise the exn:fail:contract exception is raised.

Indicates that no further bindings will be added to intdef-ctx, which must not be sealed already. See also syntax-local-make-definition-context.

(identifier-remove-from-definition-context id-stx 
  intdef-ctx) 
  identifier?
  id-stx : identifier?
  intdef-ctx : 
(or/c internal-definition-context?
      (listof internal-definition-context?))
Removes intdef-ctx (or each identifier in the list) from the lexical information of id-stx. This operation is useful for correlating an identifier that is bound in an internal-definition context with its binding before the internal-definition context was created.

If simply removing the contexts produces a different binding than completely ignoring the contexts (due to nested internal definition contexts, for example), then the resulting identifier is given a syntax mark to simulate a non-existent lexical context. The intdef-ctx argument can be a list because removing internal-definition contexts one at a time can produce a different intermediate binding than removing them all at once.

(syntax-local-value id-stx    
  [failure-thunk    
  intdef-ctx])  any
  id-stx : syntax?
  failure-thunk : (or/c (-> any) #f) = #f
  intdef-ctx : 
(or/c internal-definition-context?
      #f)
 = #f
Returns the transformer binding value of id-stx in either the context associated with intdef-ctx (if not #f) or the context of the expression being expanded (if intdef-ctx is #f). If intdef-ctx is provided, it must be an extension of the context of the expression being expanded.

If id-stx is bound to a rename transformer created with make-rename-transformer, syntax-local-value effectively calls itself with the target of the rename and returns that result, instead of the rename transformer.

If id-stx has no transformer binding (via define-syntax, let-syntax, etc.) in that environment, the result is obtained by applying failure-thunk if not #f. If failure-thunk is false, the exn:fail:contract exception is raised.

This procedure must be called during the dynamic extent of a syntax transformer application by the expander or while a module is visited, otherwise the exn:fail:contract exception is raised.

(syntax-local-value/immediate id-stx    
  [failure-thunk    
  intdef-ctx])  any
  id-stx : syntax?
  failure-thunk : (or/c (-> any) #f) = #f
  intdef-ctx : 
(or/c internal-definition-context?
      #f)
 = #f
Like syntax-local-value, but the result is normally two values. If id-stx is bound to a rename transformer, the results are the rename transformer and the identifier in the transformer. Beware that provide on an id bound to a rename transformer may export the target of the rename instead of id. See make-rename-transformer for more information. If id-stx is not bound to a rename transformer, then the results are the value that syntax-local-value would produce and #f.

If id-stx has no transformer binding, then failure-thunk is called (and it can return any number of values), or an exception is raised if failure-thunk is #f.

Returns a fresh identifier, and cooperates with the module, letrec-syntaxes+values, define-syntaxes, begin-for-syntax, and top-level expanders to bind the generated identifier to the expression stx.

A run-time expression within a module is lifted to the module’s top level, just before the expression whose expansion requests the lift. Similarly, a run-time expression outside of a module is lifted to a top-level definition. A compile-time expression in a letrec-syntaxes+values or define-syntaxes binding is lifted to a let wrapper around the corresponding right-hand side of the binding. A compile-time expression within begin-for-syntax is lifted to a define-for-syntax declaration just before the requesting expression.

Other syntactic forms can capture lifts by using local-expand/capture-lifts or local-transformer-expand/capture-lifts.

This procedure must be called during the dynamic extent of a syntax transformer application by the expander or while a module is visited, otherwise the exn:fail:contract exception is raised.

Like syntax-local-lift-expression, but binds the result to n identifiers, and returns a list of the n identifiers.

This procedure must be called during the dynamic extent of a syntax transformer application by the expander or while a module is visited, otherwise the exn:fail:contract exception is raised.

Returns a value that represents the target for expressions lifted via syntax-local-lift-expression. That is, for different transformer calls for which this procedure returns the same value (as determined by eq?), lifted expressions for the two transformer are moved to the same place. Thus, the result is useful for caching lift information to avoid redundant lifts.

This procedure must be called during the dynamic extent of a syntax transformer application by the expander or while a module is visited, otherwise the exn:fail:contract exception is raised.

Cooperates with the module form to insert stx as a top-level declaration at the end of the module currently being expanded. If the current expression being transformed is not in the module top-level, then stx is eventually expanded in an expression context.

This procedure must be called during the dynamic extent of a syntax transformer application by the expander or while a module is visited, otherwise the exn:fail:contract exception is raised.
If the current expression being transformed is not within a module form, or if it is not a run-time expression, then the exn:fail:contract exception is raised.

(syntax-local-lift-require raw-require-spec    
  stx)  syntax?
  raw-require-spec : any/c
  stx : syntax?
Lifts a #%require form corresponding to raw-require-spec (either as a syntax object or datum) to the top-level or to the top of the module currently being expanded, wrapping it with for-meta if the current expansion context is not phase level 0.

The resulting syntax object is the same as stx, except that a fresh syntax mark is added. The same syntax mark is added to the lifted #%require form, so that the #%require form can bind uses of imported identifiers in the resulting syntax object (assuming that the lexical information of stx includes the binding environment into which the #%require is lifted).

If raw-require-spec and stx are part of the input to a transformer, then typically syntax-local-introduce should be applied to each before passing them to syntax-local-lift-require, and then syntax-local-introduce should be applied to the result of syntax-local-lift-require. Otherwise, marks added by the macro expander can prevent access to the new imports.

This procedure must be called during the dynamic extent of a syntax transformer application by the expander or while a module is visited, otherwise the exn:fail:contract exception is raised.

(syntax-local-lift-provide raw-provide-spec-stx)  void?
  raw-provide-spec-stx : syntax?
Lifts a #%provide form corresponding to raw-provide-spec-stx to the top of the module currently being expanded.

This procedure must be called during the dynamic extent of a syntax transformer application by the expander or while a module is visited, otherwise the exn:fail:contract exception is raised.
If the current expression being transformed is not within a module form, or if it is not a run-time expression, then the exn:fail:contract exception is raised.

Returns an inferred name for the expression position being transformed, or #f if no such name is available. A name is normally a symbol or an identifier. See also Inferred Value Names.

This procedure must be called during the dynamic extent of a syntax transformer application by the expander or while a module is visited, otherwise the exn:fail:contract exception is raised.

(syntax-local-context)
  (or/c 'expression 'top-level 'module 'module-begin list?)
Returns an indication of the context for expansion that triggered a syntax transformer call. See Expansion Context for more information on contexts.

The symbol results indicate that the expression is being expanded for an expression context, a top-level context, a module context, or a module-begin context.

A list result indicates expansion in an internal-definition context. The identity of the list’s first element (i.e., its eq?ness) reflects the identity of the internal-definition context; in particular two transformer expansions receive the same first value if and only if they are invoked for the same internal-definition context. Later values in the list similarly identify internal-definition contexts that are still being expanded, and that required the expansion of nested internal-definition contexts.

This procedure must be called during the dynamic extent of a syntax transformer application by the expander or while a module is visited, otherwise the exn:fail:contract exception is raised.

During the dynamic extent of a syntax transformer application by the expander, the result is the phase level of the form being expanded. Otherwise, the result is 0.

Returns three lists of symbols that represent the provided bindings of the module named by mod-path. The first list corresponds to the phase level 0 exports of the module, the second list corresponds to the phase level -1 exports of the module, and the last list corresponds to the label phase level exports of the module.

This procedure must be called during the dynamic extent of a syntax transformer application by the expander or while a module is visited, otherwise the exn:fail:contract exception is raised.

(syntax-local-get-shadower id-stx)  identifier?
  id-stx : identifier?
Returns id-stx if no binding in the current expansion context shadows id-stx (ignoring unsealed internal-definition contexts and identifiers that had the 'unshadowable syntax property), if id-stx has no module bindings in its lexical information, and if the current expansion context is not a module context.

If a binding of inner-identifier shadows id-stx, the result is the same as (syntax-local-get-shadower inner-identifier), except that it has the location and properties of id-stx. When searching for a shadowing binding, bindings from unsealed internal-definition contexts are ignored.

Otherwise, the result is the same as id-stx with its module bindings (if any) removed from its lexical information, and the lexical information of the current module context (if any) added.

Thus, the result is an identifier corresponding to the innermost shadowing of id-stx in the current context if it is shadowed, and a module-contextless version of id-stx otherwise.

If id-stx is tainted or armed, then the resulting identifier is tainted.

This procedure must be called during the dynamic extent of a syntax transformer application by the expander or while a module is visited, otherwise the exn:fail:contract exception is raised.

(syntax-local-armer)
  ((syntax?) (any/c any/c) . ->* . syntax?)
Returns a procedure that captures the declaration-time code inspector of the module in which a syntax transformer was bound (if a syntax transformer is being applied) or the module being visited. The result is a procedure like syntax-taint-arm, except that the optional third argument is automatically the captured inspector.

The syntax-local-armer function is needed by macro-generating macros, where a syntax object in the generated macro needs to be protected using the code inspector of the generating macro’s module.

This procedure must be called during the dynamic extent of a syntax transformer application by the expander or while a module is visited, otherwise the exn:fail:contract exception is raised.

(syntax-local-certifier [active?])
  
((syntax?) (any/c (or/c procedure? #f))
 . ->* . syntax?)
  active? : boolean? = #f
For backward compatibility only; returns a procedure that returns its first argument.

Returns #t during the dynamic extent of a syntax transformer application by the expander and while a module is being visited, #f otherwise.

(syntax-local-introduce stx)  syntax?
  stx : syntax?
Produces a syntax object that is like stx, except that a syntax mark for the current expansion is added (possibly canceling an existing mark in parts of stx). See Transformer Bindings for information on syntax marks.

This procedure must be called during the dynamic extent of a syntax transformer application by the expander or while a module is visited, otherwise the exn:fail:contract exception is raised.

Produces a procedure that behaves like syntax-local-introduce, but using a fresh syntax mark. Multiple applications of the same make-syntax-introducer result procedure use the same mark, and different result procedures use distinct marks.

(make-syntax-delta-introducer ext-stx 
  base-stx 
  [phase-level]) 
  (syntax? . -> . syntax?)
  ext-stx : syntax?
  base-stx : (or/c syntax? #f)
  phase-level : (or/c #f exact-integer?)
   = (syntax-local-phase-level)
Produces a procedure that behaves like syntax-local-introduce, but using the syntax marks of ext-stx that are not shared with base-stx. If ext-stx does not extend the set of marks in base-stx or if base-stx is #f, and if ext-stx has a module binding in the phase level indicated by phase-level, then any marks of ext-stx that would be needed to preserve its binding are not transferred in an introduction.

This procedure is potentially useful when m-id has a transformer binding that records some orig-id, and a use of m-id introduces a binding of orig-id. In that case, the syntax marks in the use of m-id since the binding of m-id should be transferred to the binding instance of orig-id, so that it captures uses with the same lexical context as the use of m-id.

More typically, however, syntax-local-make-delta-introducer should be used, since it cooperates with rename transformers.

If ext-stx is tainted or armed, then an identifier result from the created procedure is tainted.

Determines the binding of id. If the binding is not a rename transformer, the result is an introducer as created by make-syntax-delta-introducer using id and the binding of id in the environment of expansion. If the binding is a rename transformer, then the introducer is one composed with the target of the rename transformer and its binding. Furthermore, the delta-introduce functions associated with the rename transformers (supplied as the second argument to make-rename-transformer) are composed (in first-to-last order) before the introducers created with make-syntax-delta-introducer (which are composed last-to-first).

The exn:fail:contract exception is raised if id or any identifier in its rename-transformer chain has no binding.

This procedure must be called during the dynamic extent of a syntax transformer application by the expander or while a module is visited, otherwise the exn:fail:contract exception is raised.

Returns #t while a provide transformer is running (see make-provide-transformer) or while an expand sub-form of #%provide is expanded, #f otherwise.

Can be called only while syntax-local-transforming-module-provides? returns #t.

It returns two lists of identifiers corresponding to all definitions within the module being expanded. This information is used for implementing provide sub-forms like all-defined-out.

The first result list corresponds to phase 0 (i.e., normal) definitions, and the second corresponds to phase -1 (i.e., for-syntax) definitions.

(syntax-local-module-required-identifiers mod-path 
  phase-level) 
  
(listof (cons/c (or/c exact-integer? #f)
                (listof identifier?)))
  mod-path : (or/c module-path? #f)
  phase-level : (or/c exact-integer? #f #t)
Can be called only while syntax-local-transforming-module-provides? returns #t.

It returns an association list mapping phase levels to lists of identifiers. Each list of identifiers includes all bindings imported (into the module being expanded) using the module path mod-path, or all modules if mod-path is #f. The association list includes all identifiers imported with a phase-level shift, of all shifts if phase-level is #t.

When an identifier is renamed on import, the result association list includes the identifier by its internal name. Use identifier-binding to obtain more information about the identifier.

11.4.1 require Transformers

The bindings documented in this section are provided by the racket/require-transform library, not racket/base or racket.

A transformer binding whose value is a structure with the prop:require-transformer property implements a derived require-spec for require.

The transformer is called with the syntax object representing its use as a require-spec within a require form, and the result must be two lists: a list of imports and a list of import-sources.

If the derived form contains a sub-form that is a require-spec, then it can call expand-import to transform the sub-require-spec to lists of imports and import sources.

See also define-require-syntax, which supports macro-style require transformers.

(expand-import stx)  
(listof import?) (listof import-source?)
  stx : syntax?
Expands the given require-spec to lists of imports and import sources. The latter specifies modules to be instantiated or visited, so the modules that it represents should be a superset of the modules represented in the former list (so that a module will be instantiated or visited even if all of imports are eventually filtered from the former list).

(make-require-transformer proc)  require-transformer?
  proc : 
(syntax? . -> . (values
                 (listof import?)
                 (listof import-source?)))
Creates a require transformer (i.e., a structure with the prop:require-transformer property) using the given procedure as the transformer.

A property to identify require transformers. The property value must be a procedure that takes a syntax object and returns import and import-source lists.

(require-transformer? v)  boolean?
  v : any/c
Returns #t if v has the prop:require-transformer property, #f otherwise.

(struct import (local-id
    src-sym
    src-mod-path
    mode
    req-mode
    orig-mode
    orig-stx)
  #:extra-constructor-name make-import)
  local-id : identifier?
  src-sym : symbol?
  src-mod-path : module-path?
  mode : (or/c exact-integer? #f)
  req-mode : (or/c exact-integer? #f)
  orig-mode : (or/c exact-integer? #f)
  orig-stx : syntax?
A structure representing a single imported identifier:

(struct import-source (mod-path-stx mode)
  #:extra-constructor-name make-import-source)
  mod-path-stx : 
(and/c syntax?
       (lambda (x)
         (module-path? (syntax->datum x))))
  mode : (or/c exact-integer? #f)
A structure representing an imported module, which must be instantiated or visited even if no binding is imported into a module.

For backward compatibility only; returns a procedure that returns its first argument.

11.4.2 provide Transformers

The bindings documented in this section are provided by the racket/provide-transform library, not racket/base or racket.

A transformer binding whose value is a structure with the prop:provide-transformer property implements a derived provide-spec for provide.

The transformer is called with the syntax object representing its use as a provide-spec within a provide form and a list of symbols representing the export modes specified by enclosing provide-specs. The result must be a list of exports.

If the derived form contains a sub-form that is a provide-spec, then it can call expand-export to transform the sub-provide-spec to a list of exports.

See also define-provide-syntax, which supports macro-style provide transformers.

(expand-export stx modes)  (listof export?)
  stx : syntax?
  modes : (listof (or/c exact-integer? #f))
Expands the given provide-spec to a list of exports. The modes list controls the expansion of sub-provide-specs; for example, an identifier refers to a phase level 0 binding unless the modes list specifies otherwise. Normally, modes is either empty or contains a single element.

Creates a provide transformer (i.e., a structure with the prop:provide-transformer property) using the given procedure as the transformer.

A property to identify provide transformers. The property value must be a procedure that takes a syntax object and mode list and returns an export list.

(provide-transformer? v)  boolean?
  v : any/c
Returns #t if v has the prop:provide-transformer property, #f otherwise.

(struct export (local-id out-sym mode protect? orig-stx)
  #:extra-constructor-name make-export)
  local-id : identifier?
  out-sym : symbol?
  mode : (or/c exact-integer? #f)
  protect? : any/c
  orig-stx : syntax?
A structure representing a single imported identifier:

For backward compatibility only; returns a procedure that returns its first argument.