On this page:
hash?
hash-equal?
hash-eqv?
hash-eq?
hash-weak?
hash
hasheq
hasheqv
make-hash
make-hasheqv
make-hasheq
make-weak-hash
make-weak-hasheqv
make-weak-hasheq
make-immutable-hash
make-immutable-hasheqv
make-immutable-hasheq
hash-set!
hash-set*!
hash-set
hash-set*
hash-ref
hash-ref!
hash-has-key?
hash-update!
hash-update
hash-remove!
hash-remove
hash-map
hash-keys
hash-values
hash->list
hash-for-each
hash-count
hash-iterate-first
hash-iterate-next
hash-iterate-key
hash-iterate-value
hash-copy
eq-hash-code
eqv-hash-code
equal-hash-code
equal-secondary-hash-code

3.13 Hash Tables

+Hash Tables in The Racket Guide introduces hash tables.

A hash table (or simply hash) maps each of its keys to a single value. For a given hash table, keys are equivalent via equal?, eqv?, or eq?, and keys are retained either strongly or weakly (see Weak Boxes). A hash table is also either mutable or immutable. Immutable hash tables support effectively constant-time access and update, just like mutable hash tables; the constant on immutable operations is usually larger, but the functional nature of immutable hash tables can pay off in certain algorithms.

Immutable hash tables actually provide O(log N) access and update. Since N is limited by the address space so that log N is limited to less than 30 or 62 (depending on the platform), log N can be treated reasonably as a constant.

A hash table can be used as a two-valued sequence (see Sequences). The keys and values of the hash table serve as elements of the sequence (i.e., each element is a key and its associated value). If a mapping is added to or removed from the hash table during iteration, then an iteration step may fail with exn:fail:contract, or the iteration may skip or duplicate keys and values. See also in-hash, in-hash-keys, in-hash-values, and in-hash-pairs.

Two hash tables cannot be equal? unless they use the same key-comparison procedure (equal?, eqv?, or eq?), both hold keys strongly or weakly, and have the same mutability.

Caveats concerning concurrent modification: A mutable hash table can be manipulated with hash-ref, hash-set!, and hash-remove! concurrently by multiple threads, and the operations are protected by a table-specific semaphore as needed. Three caveats apply, however:

Caveat concerning mutable keys: If a key in an equal?-based hash table is mutated (e.g., a key string is modified with string-set!), then the hash table’s behavior for insertion and lookup operations becomes unpredictable.

A literal or printed hash table starts with #hash, #hasheqv, or #hasheq. See Reading Hash Tables for information on reading hash tables and Printing Hash Tables for information on printing hash tables.

(hash? v)  boolean?
  v : any/c
Returns #t if v is a hash table, #f otherwise.

(hash-equal? hash)  boolean?
  hash : hash?
Returns #t if hash compares keys with equal?, #f if it compares with eq? or eqv?.

(hash-eqv? hash)  boolean?
  hash : hash?
Returns #t if hash compares keys with eqv?, #f if it compares with equal? or eq?.

(hash-eq? hash)  boolean?
  hash : hash?
Returns #t if hash compares keys with eq?, #f if it compares with equal? or eqv?.

(hash-weak? hash)  boolean?
  hash : hash?
Returns #t if hash retains its keys weakly, #f if it retains keys strongly.

(hash key val ... ...)  (and/c hash? hash-equal? immutable?)
  key : any/c
  val : any/c
(hasheq key val ... ...)  (and/c hash? hash-eq? immutable?)
  key : any/c
  val : any/c
(hasheqv key val ... ...)  (and/c hash? hash-eqv? immutable?)
  key : any/c
  val : any/c
Creates an immutable hash table with each given key mapped to the following val; each key must have a val, so the total number of arguments to hash must be even.

The hash procedure creates a table where keys are compared with equal?, hasheq procedure creates a table where keys are compared with eq?, and hasheqv procedure creates a table where keys are compared with eqv?.

The key to val mappings are added to the table in the order that they appear in the argument list, so later mappings can hide earlier mappings if the keys are equal.

(make-hash [assocs])  (and/c hash? hash-equal?)
  assocs : (listof pair?) = null
(make-hasheqv [assocs])  (and/c hash? hash-eqv?)
  assocs : (listof pair?) = null
(make-hasheq [assocs])  (and/c hash? hash-eq?)
  assocs : (listof pair?) = null
Creates a mutable hash table that holds keys strongly.

The make-hash procedure creates a table where keys are compared with equal?, make-hasheq procedure creates a table where keys are compared with eq?, and make-hasheqv procedure creates a table where keys are compared with eqv?.

The table is initialized with the content of assocs. In each element of assocs, the car is a key, and the cdr is the corresponding value. The mappings are added to the table in the order that they appear in assocs, so later mappings can hide earlier mappings.

See also make-custom-hash.

(make-weak-hash [assocs])  (and/c hash? hash-equal? hash-weak?)
  assocs : (listof pair?) = null
(make-weak-hasheqv [assocs])  (and/c hash? hash-eqv? hash-weak?)
  assocs : (listof pair?) = null
(make-weak-hasheq [assocs])  (and/c hash? hash-eq? hash-weak?)
  assocs : (listof pair?) = null
Like make-hash, make-hasheq, and make-hasheqv, but creates a mutable hash table that holds keys weakly.

(make-immutable-hash [assocs])
  (and/c hash? hash-equal? immutable?)
  assocs : (listof pair?) = null
(make-immutable-hasheqv [assocs])
  (and/c hash? hash-eqv? immutable?)
  assocs : (listof pair?) = null
(make-immutable-hasheq [assocs])
  (and/c hash? hash-eq? immutable?)
  assocs : (listof pair?) = null
Like hash, hasheq, and hasheqv, but accepts the key–value mapping in association-list form like make-hash, make-hasheq, and make-hasheqv.

(hash-set! hash key v)  void?
  hash : (and/c hash? (not/c immutable?))
  key : any/c
  v : any/c
Maps key to v in hash, overwriting any existing mapping for key.

See also the caveats concerning concurrent modification and the caveat concerning mutable keys above.

(hash-set*! hash key v ... ...)  void?
  hash : (and/c hash? (not/c immutable?))
  key : any/c
  v : any/c
Maps each key to each v in hash, overwriting any existing mapping for each key. Mappings are added from the left, so later mappings overwrite earlier mappings.

See also the caveats concerning concurrent modification and the caveat concerning mutable keys above.

(hash-set hash key v)  (and/c hash? immutable?)
  hash : (and/c hash? immutable?)
  key : any/c
  v : any/c
Functionally extends hash by mapping key to v, overwriting any existing mapping for key, and returning the extended hash table.

See also the caveat concerning mutable keys above.

(hash-set* hash key v ... ...)  (and/c hash? immutable?)
  hash : (and/c hash? immutable?)
  key : any/c
  v : any/c
Functionally extends hash by mapping each key to v, overwriting any existing mapping for each key, and returning the extended hash table. Mappings are added from the left, so later mappings overwrite earlier mappings.

See also the caveat concerning mutable keys above.

(hash-ref hash key [failure-result])  any
  hash : hash?
  key : any/c
  failure-result : any/c
   = 
(lambda ()
  (raise (make-exn:fail:contract ....)))
Returns the value for key in hash. If no value is found for key, then failure-result determines the result:

See also the caveats concerning concurrent modification and the caveat concerning mutable keys above.

(hash-ref! hash key to-set)  any
  hash : hash?
  key : any/c
  to-set : any/c
Returns the value for key in hash. If no value is found for key, then to-set determines the result as in hash-ref (i.e., it is either a thunk that computes a value or a plain value), and this result is stored in hash for the key. (Note that if to-set is a thunk, it is not invoked in tail position.)

See also the caveats concerning concurrent modification and the caveat concerning mutable keys above.

(hash-has-key? hash key)  boolean?
  hash : hash?
  key : any/c
Returns #t if hash contains a value for the given key, #f otherwise.

(hash-update! hash    
  key    
  updater    
  [failure-result])  void?
  hash : (and/c hash? (not/c immutable?))
  key : any/c
  updater : (any/c . -> . any/c)
  failure-result : any/c
   = 
(lambda ()
  (raise (make-exn:fail:contract ....)))
Composes hash-ref and hash-set! to update an existing mapping in hash, where the optional failure-result argument is used as in hash-ref when no mapping exists for key already. See the caveat above about concurrent updates.

See also the caveats concerning concurrent modification and the caveat concerning mutable keys above.

(hash-update hash key updater [failure-result])
  (and/c hash? immutable?)
  hash : (and/c hash? immutable?)
  key : any/c
  updater : (any/c . -> . any/c)
  failure-result : any/c
   = 
(lambda ()
  (raise (make-exn:fail:contract ....)))
Composes hash-ref and hash-set to functionally update an existing mapping in hash, where the optional failure-result argument is used as in hash-ref when no mapping exists for key already.

See also the caveat concerning mutable keys above.

(hash-remove! hash key)  void?
  hash : (and/c hash? (not/c immutable?))
  key : any/c
Removes any existing mapping for key in hash.

See also the caveats concerning concurrent modification and the caveat concerning mutable keys above.

(hash-remove hash key)  (and/c hash? immutable?)
  hash : (and/c hash? immutable?)
  key : any/c
Functionally removes any existing mapping for key in hash, returning the fresh hash table.

See also the caveat concerning mutable keys above.

(hash-map hash proc)  (listof any/c)
  hash : hash?
  proc : (any/c any/c . -> . any/c)
Applies the procedure proc to each element in hash in an unspecified order, accumulating the results into a list. The procedure proc is called each time with a key and its value.

If a hash table is extended with new keys (either through proc or by another thread) while a hash-map or hash-for-each traversal is in process, arbitrary key–value pairs can be dropped or duplicated in the traversal. Key mappings can be deleted or remapped (by any thread) with no adverse affects; the change does not affect a traversal if the key has been seen already, otherwise the traversal skips a deleted key or uses the remapped key’s new value.

See also the caveats concerning concurrent modification above.

(hash-keys hash)  (listof any/c)
  hash : hash?
Returns a list of the keys of hash in an unspecified order.

See hash-map for information about modifying hash during hash-keys.

(hash-values hash)  (listof any/c)
  hash : hash?
Returns a list of the values of hash in an unspecified order.

See hash-map for information about modifying hash during hash-values.

(hash->list hash)  (listof (cons/c any/c any/c))
  hash : hash?
Returns a list of the key–value pairs of hash in an unspecified order.

See hash-map for information about modifying hash during hash->list.

(hash-for-each hash proc)  void?
  hash : hash?
  proc : (any/c any/c . -> . any)
Applies proc to each element in hash (for the side-effects of proc) in an unspecified order. The procedure proc is called each time with a key and its value.

See hash-map for information about modifying hash within proc.

(hash-count hash)  exact-nonnegative-integer?
  hash : hash?
Returns the number of keys mapped by hash. Unless hash retains keys weakly, the result is computed in constant time and atomically. If hash retains it keys weakly, a traversal is required to count the keys.

(hash-iterate-first hash)
  (or/c #f exact-nonnegative-integer?)
  hash : hash?
Returns #f if hash contains no elements, otherwise it returns an integer that is an index to the first element in the hash table; “first” refers to an unspecified ordering of the table elements, and the index values are not necessarily consecutive integers. For a mutable hash, this index is guaranteed to refer to the first item only as long as no items are added to or removed from hash.

(hash-iterate-next hash pos)
  (or/c #f exact-nonnegative-integer?)
  hash : hash?
  pos : exact-nonnegative-integer?
Returns either an integer that is an index to the element in hash after the element indexed by pos (which is not necessarily one more than pos) or #f if pos refers to the last element in hash. If pos is not a valid index, then the exn:fail:contract exception is raised. For a mutable hash, the result index is guaranteed to refer to its item only as long as no items are added to or removed from hash.

(hash-iterate-key hash pos)  any
  hash : hash?
  pos : exact-nonnegative-integer?
Returns the key for the element in hash at index pos. If pos is not a valid index for hash, the exn:fail:contract exception is raised.

(hash-iterate-value hash pos)  any
  hash : hash?
  pos : exact-nonnegative-integer?
Returns the value for the element in hash at index pos. If pos is not a valid index for hash, the exn:fail:contract exception is raised.

(hash-copy hash)  (and/c hash? (not/c immutable?))
  hash : hash?
Returns a mutable hash table with the same mappings, same key-comparison mode, and same key-holding strength as hash.

(eq-hash-code v)  fixnum?
  v : any/c
Returns a fixnum; for any two calls with eq? values, the returned number is the same.

Equal fixnums are always eq?.

(eqv-hash-code v)  fixnum?
  v : any/c
Returns a fixnum; for any two calls with eqv? values, the returned number is the same.

(equal-hash-code v)  fixnum?
  v : any/c
Returns a fixnum; for any two calls with equal? values, the returned number is the same. A hash code is computed even when v contains a cycle through pairs, vectors, boxes, and/or inspectable structure fields. See also prop:equal+hash.

Like equal-hash-code, but computes a secondary value suitable for use in double hashing.