Title

SRFI 9: Defining Record Types

Author

Richard Kelsey

Status

This SRFI is currently in ``final'' status. To see an explanation of each status that a SRFI can hold, see here. You can access the discussion via the archive of the mailing list.

Abstract

This SRFI describes syntax for creating new data types, called record types. A predicate, constructor, and field accessors and modifiers are defined for each record type. Each new record type is distinct from all existing types, including other record types and Scheme's predefined types.

Rationale

Many Scheme implementations provide means for creating new types, usually called either records or structures. The DEFINE-RECORD-TYPE syntax described here is a slight simplification of one written for Scheme 48 by Jonathan Rees. Unlike many record-defining macros or special forms, it does not create any new identifiers. Instead, the names of the record type, predicate, constructor, and so on are all listed explicitly in the source. This has the following advantages:

Specification

The syntax of a record-type definition is:
 <command or definition>           
   -> <record type definition>           ; addition to 8.1.6 in R5RS

 <record type definition>
   -> (define-record-type <type name>
	(<constructor name> <field tag> ...)
	<predicate name>
	<field spec> ...)

 <field spec> -> (<field tag> <accessor name>)
              -> (<field tag> <accessor name> <modifier name>)

 <field tag> -> <identifier>
 <... name>  -> <identifier>
DEFINE-RECORD-TYPE is generative: each use creates a new record type that is distinct from all existing types, including other record types and Scheme's predefined types. Record-type definitions may only occur at top-level (there are two possible semantics for `internal' record-type definitions, generative and nongenerative, and no consensus as to which is better).

An instance of DEFINE-RECORD-TYPE is equivalent to the following definitions:

Records are disjoint from the types listed in Section 4.2 of R5RS.

Set!ing the value of any of these identifiers has no effect on the behavior of any of their original values.

The following

  (define-record-type :pare
    (kons x y)
    pare?
    (x kar set-kar!)
    (y kdr))
defines KONS to be a constructor, KAR and KDR to be accessors, SET-KAR! to be a modifier, and PARE? to be a predicate for :PAREs.
  (pare? (kons 1 2))        --> #t
  (pare? (cons 1 2))        --> #f
  (kar (kons 1 2))          --> 1
  (kdr (kons 1 2))          --> 2
  (let ((k (kons 1 2)))
    (set-kar! k 3)
    (kar k))                --> 3

Implementation

This code is divided into three layers. In top-down order these are:
  1. Syntax definitions for DEFINE-RECORD-TYPE and an auxiliary macro.
  2. An implementation of record types with a procedural interface. Some Scheme implementations already have something close to this.
  3. Vector-like records implemented in R5RS. This redefines some standard Scheme procedures and therefor must be loaded before any other code, including part 2 above. Note that these procedures can be used to break the record-type abstraction (for example, RECORD-SET! can be used to modify the type of a record). Access to these procedures should be restricted.

Syntax definitions

; Definition of DEFINE-RECORD-TYPE

(define-syntax define-record-type
  (syntax-rules ()
    ((define-record-type type
       (constructor constructor-tag ...)
       predicate
       (field-tag accessor . more) ...)
     (begin
       (define type
         (make-record-type 'type '(field-tag ...)))
       (define constructor
         (record-constructor type '(constructor-tag ...)))
       (define predicate
         (record-predicate type))
       (define-record-field type field-tag accessor . more)
       ...))))

; An auxilliary macro for define field accessors and modifiers.
; This is needed only because modifiers are optional.

(define-syntax define-record-field
  (syntax-rules ()
    ((define-record-field type field-tag accessor)
     (define accessor (record-accessor type 'field-tag)))
    ((define-record-field type field-tag accessor modifier)
     (begin
       (define accessor (record-accessor type 'field-tag))
       (define modifier (record-modifier type 'field-tag))))))

Record types

; We define the following procedures:
; 
; (make-record-type <type-name <field-names>)    -> <record-type>
; (record-constructor <record-type<field-names>) -> <constructor>
; (record-predicate <record-type>)               -> <predicate>
; (record-accessor <record-type <field-name>)    -> <accessor>
; (record-modifier <record-type <field-name>)    -> <modifier>
;   where
; (<constructor> <initial-value> ...)         -> <record>
; (<predicate> <value>)                       -> <boolean>
; (<accessor> <record>)                       -> <value>
; (<modifier> <record> <value>)         -> <unspecific>

; Record types are implemented using vector-like records.  The first
; slot of each record contains the record's type, which is itself a
; record.

(define (record-type record)
  (record-ref record 0))

;----------------
; Record types are themselves records, so we first define the type for
; them.  Except for problems with circularities, this could be defined as:
;  (define-record-type :record-type
;    (make-record-type name field-tags)
;    record-type?
;    (name record-type-name)
;    (field-tags record-type-field-tags))
; As it is, we need to define everything by hand.

(define :record-type (make-record 3))
(record-set! :record-type 0 :record-type)	; Its type is itself.
(record-set! :record-type 1 ':record-type)
(record-set! :record-type 2 '(name field-tags))

; Now that :record-type exists we can define a procedure for making more
; record types.

(define (make-record-type name field-tags)
  (let ((new (make-record 3)))
    (record-set! new 0 :record-type)
    (record-set! new 1 name)
    (record-set! new 2 field-tags)
    new))

; Accessors for record types.

(define (record-type-name record-type)
  (record-ref record-type 1))

(define (record-type-field-tags record-type)
  (record-ref record-type 2))

;----------------
; A utility for getting the offset of a field within a record.

(define (field-index type tag)
  (let loop ((i 1) (tags (record-type-field-tags type)))
    (cond ((null? tags)
           (error "record type has no such field" type tag))
          ((eq? tag (car tags))
           i)
          (else
           (loop (+ i 1) (cdr tags))))))

;----------------
; Now we are ready to define RECORD-CONSTRUCTOR and the rest of the
; procedures used by the macro expansion of DEFINE-RECORD-TYPE.

(define (record-constructor type tags)
  (let ((size (length (record-type-field-tags type)))
        (arg-count (length tags))
        (indexes (map (lambda (tag)
                        (field-index type tag))
                      tags)))
    (lambda args
      (if (= (length args)
             arg-count)
          (let ((new (make-record (+ size 1))))
            (record-set! new 0 type)
            (for-each (lambda (arg i)
			(record-set! new i arg))
                      args
                      indexes)
            new)
          (error "wrong number of arguments to constructor" type args)))))

(define (record-predicate type)
  (lambda (thing)
    (and (record? thing)
         (eq? (record-type thing)
              type))))

(define (record-accessor type tag)
  (let ((index (field-index type tag)))
    (lambda (thing)
      (if (and (record? thing)
               (eq? (record-type thing)
                    type))
          (record-ref thing index)
          (error "accessor applied to bad value" type tag thing)))))

(define (record-modifier type tag)
  (let ((index (field-index type tag)))
    (lambda (thing value)
      (if (and (record? thing)
               (eq? (record-type thing)
                    type))
          (record-set! thing index value)
          (error "modifier applied to bad value" type tag thing)))))

Records

; This implements a record abstraction that is identical to vectors,
; except that they are not vectors (VECTOR? returns false when given a
; record and RECORD? returns false when given a vector).  The following
; procedures are provided:
;   (record? <value>)                -> <boolean>
;   (make-record <size>)             -> <record>
;   (record-ref <record> <index>)    -> <value>
;   (record-set! <record> <index> <value>) -> <unspecific>
;
; These can implemented in R5RS Scheme as vectors with a distinguishing
; value at index zero, providing VECTOR? is redefined to be a procedure
; that returns false if its argument contains the distinguishing record
; value.  EVAL is also redefined to use the new value of VECTOR?.

; Define the marker and redefine VECTOR? and EVAL.

(define record-marker (list 'record-marker))

(define real-vector? vector?)

(define (vector? x)
  (and (real-vector? x)
       (or (= 0 (vector-length x))
	   (not (eq? (vector-ref x 0)
		record-marker)))))

; This won't work if ENV is the interaction environment and someone has
; redefined LAMBDA there.

(define eval
  (let ((real-eval eval))
    (lambda (exp env)
      ((real-eval `(lambda (vector?) ,exp))
       vector?))))

; Definitions of the record procedures.

(define (record? x)
  (and (real-vector? x)
       (< 0 (vector-length x))
       (eq? (vector-ref x 0)
            record-marker)))

(define (make-record size)
  (let ((new (make-vector (+ size 1))))
    (vector-set! new 0 record-marker)
    new))

(define (record-ref record index)
  (vector-ref record (+ index 1)))

(define (record-set! record index value)
  (vector-set! record (+ index 1) value))

Copyright

Copyright (C) Richard Kelsey (1999). All Rights Reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.


Editor: Mike Sperber