9 Pattern Matching

Pattern Matching in The Racket Guide introduces pattern matching.

The match form and related forms support general pattern matching on Racket values. See also Regular Expressions for information on regular-expression matching on strings, bytes, and streams.

(require racket/match)

package: base

The bindings documented in this section are provided by the racket/match and racket libraries, but not racket/base.

syntax
(match val-expr clause ...)

clause = [pat body ...+]
| [pat (=> id) body ...+]
| [pat #:when cond-expr body ...+]

Finds the first pat that matches the result of val-expr, and evaluates the corresponding bodys with bindings introduced by pat (if any). Bindings introduced by pat are not available in other parts of pat. The last body in the matching clause is evaluated in tail position with respect to the match expression.

To find a match, the clauses are tried in order. If no clause matches, then the exn:misc:match? exception is raised.

An optional #:when cond-expr specifies that the pattern should only match if cond-expr produces a true value. cond-expr is in the scope of all of the variables bound in pat. cond-expr must not mutate the object being matched before calling the failure procedure, otherwise the behavior of matching is unpredictable. See also failure-cont, which is a lower-level mechanism achieving the same ends.

An optional (=> id) between a pat and the bodys is bound to a failure procedure of zero arguments. If this procedure is invoked, it escapes back to the pattern matching expression, and resumes the matching process as if the pattern had failed to match. The bodys must not mutate the object being matched before calling the failure procedure, otherwise the behavior of matching is unpredictable.

The grammar of pat is as follows, where non-italicized identifiers are recognized symbolically (i.e., not by binding).

pat	::=	id	match anything, bind identifier
	\|	(var id)	match anything, bind identifier
	\|	_	match anything
	\|	literal	match literal
	\|	(quote datum)	match equal? value
	\|	(list lvp ...)	match sequence of lvps
	\|	(list-rest lvp ... pat)	match lvps consed onto a pat
	\|	(list-no-order pat ...)	match pats in any order
	\|	(list-no-order pat ... lvp)	match pats in any order
	\|	(vector lvp ...)	match vector of pats
	\|	(hash-table (pat pat) ...)	match hash table
	\|	(hash-table (pat pat) ...+ ooo)	match hash table
	\|	(cons pat pat)	match pair of pats
	\|	(mcons pat pat)	match mutable pair of pats
	\|	(box pat)	match boxed pat
	\|	(struct-id pat ...)	match struct-id instance
	\|	(struct struct-id (pat ...))	match struct-id instance
	\|	(regexp rx-expr)	match string
	\|	(regexp rx-expr pat)	match string, result with pat
	\|	(pregexp px-expr)	match string
	\|	(pregexp px-expr pat)	match string, result with pat
	\|	(and pat ...)	match when all pats match
	\|	(or pat ...)	match when any pat match
	\|	(not pat ...)	match when no pat matches
	\|	(app expr pats ...)	match (expr value) output values to pats
	\|	(? expr pat ...)	match if (expr value) and pats
	\|	(quasiquote qp)	match a quasipattern
	\|	derived-pattern	match using extension
literal	::=	#t	match true
	\|	#f	match false
	\|	string	match equal? string
	\|	bytes	match equal? byte string
	\|	number	match equal? number
	\|	char	match equal? character
	\|	keyword	match equal? keyword
	\|	regexp	match equal? regexp literal
	\|	pregexp	match equal? pregexp literal
lvp	::=	pat ooo	greedily match pat instances
	\|	pat	match pat
qp	::=	literal	match literal
	\|	id	match symbol
	\|	(qp ...)	match sequences of qps
	\|	(qp ... . qp)	match qps ending qp
	\|	(qp ooo . qp)	match qps beginning with repeated qp
	\|	#(qp ...)	match vector of qps
	\|	#&qp	match boxed qp
	\|	#s(prefab-key qp ...)	match prefab struct with qp fields
	\|	,pat	match pat
	\|	,@(list lvp ...)	match lvps, spliced
	\|	,@(list-rest lvp ... pat)	match lvps plus pat, spliced
	\|	,@'qp	match list-matching qp, spliced
ooo	::=	...	zero or more; ... is literal
	\|	___	zero or more
	\|	..k	k or more
	\|	__k	k or more

In more detail, patterns match as follows:

id (excluding the reserved names _, ..., .._, ..k, and ..k for non-negative integers k) or (var id) — matches anything, and binds id to the matching values. If an id is used multiple times within a pattern, the corresponding matches must be the same according to (match-equality-test), except that instances of an id in different or and not sub-patterns are independent. The binding for id is not available in other parts of the same pattern.

Examples:

> (match '(1 2 3)
    [(list a b a) (list a b)]
    [(list a b c) (list c b a)])
'(3 2 1)
> (match '(1 (x y z) 1)
    [(list a b a) (list a b)]
    [(list a b c) (list c b a)])
'(1 (x y z))

_ — matches anything, without binding any identifiers.
Example:
> (match '(1 2 3)
[(list _ _ a) a])
3
#t, #f, string, bytes, number, char, or (quote datum) — matches an equal? constant.
Example:
> (match "yes"
["no" #f]
["yes" #t])
#t

(list lvp ...) — matches a list of elements. In the case of (list pat ...), the pattern matches a list with as many element as pats, and each element must match the corresponding pat. In the more general case, each lvp corresponds to a “spliced” list of greedy matches.

For spliced lists, ... and ___ are aliases for zero or more matches. The ..k and __k forms are also aliases, specifying k or more matches. Pattern variables that precede these splicing operators are bound to lists of matching forms.

Examples:

> (match '(1 2 3)
    [(list a b c) (list c b a)])
'(3 2 1)
> (match '(1 2 3)
    [(list 1 a ...) a])
'(2 3)
> (match '(1 2 3)
    [(list 1 a ..3) a]
    [_ 'else])
'else
> (match '(1 2 3 4)
    [(list 1 a ..3) a]
    [_ 'else])
'(2 3 4)
> (match '(1 2 3 4 5)
    [(list 1 a ..3 5) a]
    [_ 'else])
'(2 3 4)
> (match '(1 (2) (2) (2) 5)
    [(list 1 (list a) ..3 5) a]
    [_ 'else])
'(2 2 2)

(list-rest lvp ... pat) — similar to a list pattern, but the final pat matches the “rest” of the list after the last lvp. In fact, the matched value can be a non-list chain of pairs (i.e., an “improper list”) if pat matches non-list values.
Examples:
> (match '(1 2 3 . 4)
[(list-rest a b c d) d])
4
> (match '(1 2 3 . 4)
[(list-rest a ... d) (list a d)])
'((1 2 3) 4)
(list-no-order pat ...) — similar to a list pattern, but the elements to match each pat can appear in the list in any order.
Example:
> (match '(1 2 3)
[(list-no-order 3 2 x) x])
1
(list-no-order pat ... lvp) — generalizes list-no-order to allow a pattern that matches multiple list elements that are interspersed in any order with matches for the other patterns.
Example:
> (match '(1 2 3 4 5 6)
[(list-no-order 6 2 y ...) y])
'(1 3 4 5)
(vector lvp ...) — like a list pattern, but matching a vector.
Example:
> (match #(1 (2) (2) (2) 5)
[(vector 1 (list a) ..3 5) a])
'(2 2 2)
(hash-table (pat pat) ...) — similar to list-no-order, but matching against hash table’s key–value pairs.
Example:
> (match #hash(("a" . 1) ("b" . 2))
[(hash-table ("b" b) ("a" a)) (list b a)])
'(2 1)
(hash-table (pat pat) ...+ ooo) — Generalizes hash-table to support a final repeating pattern.
Example:
> (match #hash(("a" . 1) ("b" . 2))
[(hash-table (key val) ...) key])
'("a" "b")
(cons pat1 pat2) — matches a pair value.
Example:
> (match (cons 1 2)
[(cons a b) (+ a b)])
3
(mcons pat1 pat2) — matches a mutable pair value.
Example:
> (match (mcons 1 2)
[(cons a b) 'immutable]
[(mcons a b) 'mutable])
'mutable
(box pat) — matches a boxed value.
Example:
> (match #&1
[(box a) a])
1
(struct-id pat ...) or (struct struct-id (pat ...)) — matches an instance of a structure type named struct-id, where each field in the instance matches the corresponding pat. See also struct*.
Usually, struct-id is defined with struct. More generally, struct-id must be bound to expansion-time information for a structure type (see Structure Type Transformer Binding), where the information includes at least a predicate binding and field accessor bindings corresponding to the number of field pats. In particular, a module import or a unit import with a signature containing a struct declaration can provide the structure type information.
Examples:
(define-struct tree (val left right))

> (match (make-tree 0 (make-tree 1 #f #f) #f)
[(tree a (tree b _ _) _) (list a b)])
'(0 1)
(struct struct-id _) — matches any instance of struct-id, without regard to contents of the fields of the instance.
(regexp rx-expr) — matches a string that matches the regexp pattern produced by rx-expr; see Regular Expressions for more information about regexps.
Examples:
> (match "apple"
    [(regexp #rx"p+") 'yes]
    [_ 'no])
'yes
> (match "banana"
    [(regexp #rx"p+") 'yes]
    [_ 'no])
'no
(regexp rx-expr pat) — extends the regexp form to further constrain the match where the result of regexp-match is matched against pat.
Examples:
> (match "apple"
    [(regexp #rx"p+(.)" (list _ "l")) 'yes]
    [_ 'no])
'yes
> (match "append"
    [(regexp #rx"p+(.)" (list _ "l")) 'yes]
    [_ 'no])
'no
(pregexp rx-expr) or (regexp rx-expr pat) — like the regexp patterns, but if rx-expr produces a string, it is converted to a pattern using pregexp instead of regexp.
(and pat ...) — matches if all of the pats match. This pattern is often used as (and id pat) to bind id to the entire value that matches pat. The pats are matched in the order that they appear.
Example:
> (match '(1 (2 3) 4)
[(list _ (and a (list _ ...)) _) a])
'(2 3)
(or pat ...) — matches if any of the pats match. Beware: the result expression can be duplicated once for each pat! Identifiers in pat are bound only in the corresponding copy of the result expression; in a module context, if the result expression refers to a binding, then all pats must include the binding.
Example:
> (match '(1 2)
[(or (list a 1) (list a 2)) a])
1
(not pat ...) — matches when none of the pats match, and binds no identifiers.
Examples:
> (match '(1 2 3)
   [(list (not 4) ...) 'yes]
   [_ 'no])
'yes
> (match '(1 4 3)
   [(list (not 4) ...) 'yes]
   [_ 'no])
'no
(app expr pats ...) — applies expr to the value to be matched; the result of the application is matched against pats.
Examples:
> (match '(1 2)
[(app length 2) 'yes])
'yes
> (match '(1 2)
[(app (lambda (v) (split-at v 1)) '(1) '(2)) 'yes])
'yes
(? expr pat ...) — applies expr to the value to be matched, and checks whether the result is a true value; the additional pats must also match; i.e., ? combines a predicate application and an and pattern. However, ?, unlike and, guarantees that expr is matched before any of the pats.
The expr procedure may be called more than once on identical input (although this happens only rarely), and the order in which calls to expr are made should not be relied upon.
Example:
> (match '(1 3 5)
[(list (? odd?) ...) 'yes])
'yes
(quasiquote qp) — introduces a quasipattern, in which identifiers match symbols. Like the quasiquote expression form, unquote and unquote-splicing escape back to normal patterns.
Example:
> (match '(1 2 3)
[`(1 ,a ,(? odd? b)) (list a b)])
'(2 3)
derived-pattern — matches a pattern defined by a macro extension via define-match-expander.

Note that the matching process may destructure the input multiple times, and may evaluate expressions embedded in patterns such as (app expr pat) in arbitrary order, or multiple times. Therefore, such expressions must be safe to call multiple times, or in an order other than they appear in the original program.

9.1 Additional Matching Forms

syntax
(match* (val-expr ...+) clause* ...)

clause* = [(pat ...+) body ...+]
| [(pat ...+) (=> id) body ...+]
| [(pat ...+) #:when cond-expr body ...+]

Matches a sequence of values against each clause in order, matching only when all patterns in a clause match. Each clause must have the same number of patterns as the number of val-exprs.

Examples:

> (match* (1 2 3)
   [(_ (? number?) x) (add1 x)])
4
> (match* (15 17)
   [((? number? a) (? number? b))
    #:when (= (+ a 2) b)
    'diff-by-two])
'diff-by-two

syntax
(match/values expr clause clause ...)

If expr evaluates to n values, then match all n values against the patterns in clause .... Each clause must contain exactly n patterns. At least one clause is required to determine how many values to expect from expr.

syntax
(define/match (head args)
match*-clause ...)

head = id
| (head args)

args = arg ...
| arg ... . rest-id

arg = arg-id
| [arg-id default-expr]
| keyword arg-id
| keyword [arg-id default-expr]

match*-clause = [(pat ...+) body ...+]
| [(pat ...+) (=> id) body ...+]
| [(pat ...+) #:when cond-expr body ...+]

Binds id to a procedure that is defined by pattern matching clauses using match*. Each clause takes a sequence of patterns that correspond to the arguments in the function header. The arguments are ordered as they appear in the function header for matching purposes.

Examples:

> (define/match (fact n)
[(0) 1]
[(n) (* n (fact (sub1 n)))])
> (fact 5)
120

The function header may also contain optional or keyword arguments, may have curried arguments, and may also contain a rest argument.

Examples:

> (define/match ((f x) #:y [y '(1 2 3)])
    [((regexp #rx"p+") `(,a 2 3)) a]
    [(_ _) #f])
> ((f "ape") #:y '(5 2 3))
5
> ((f "dog"))
#f
> (define/match (g x y . rst)
    [(0 0 '()) #t]
    [(5 5 '(5 5)) #t]
    [(_ _ _) #f])
> (g 0 0)
#t
> (g 5 5 5 5)
#t
> (g 1 2)
#f

syntax
(match-lambda clause ...)

Equivalent to (lambda (id) (match id clause ...)).

syntax
(match-lambda* clause ...)

Equivalent to (lambda lst (match lst clause ...)).

syntax
(match-lambda** clause* ...)

Equivalent to (lambda (args ...) (match* (args ...) clause* ...)), where the number of args ... is computed from the number of patterns appearing in each of the clause*.

syntax
(match-let ([pat expr] ...) body ...+)

Generalizes let to support pattern bindings. Each expr is matched against its corresponding pat (the match must succeed), and the bindings that pat introduces are visible in the bodys.

Example:

> (match-let ([(list a b) '(1 2)]
[(vector x ...) #(1 2 3 4)])
(list b a x))
'(2 1 (1 2 3 4))

syntax
(match-let* ([pat expr] ...) body ...+)

Like match-let, but generalizes let*, so that the bindings of each pat are available in each subsequent expr.

Example:

> (match-let* ([(list a b) '(#(1 2 3 4) 2)]
[(vector x ...) a])
x)
'(1 2 3 4)

syntax
(match-let-values ([(pat ...) expr] ...) body ...+)

Like match-let, but generalizes let-values.

syntax
(match-let*-values ([(pat ...) expr] ...) body ...+)

Like match-let*, but generalizes let*-values.

syntax
(match-letrec ([pat expr] ...) body ...+)

Like match-let, but generalizes letrec.

syntax
(match-letrec-values ([(pat ...) expr] ...) body ...+)

Like match-let, but generalizes letrec-values.

Added in version 6.1.1.8 of package base.

syntax
(match-define pat expr)

Defines the names bound by pat to the values produced by matching against the result of expr.

Examples:

> (match-define (list a b) '(1 2))
> b
2

syntax
(match-define-values (pat pats ...) expr)

Like match-define but for when expr produces multiple values. Like match/values, it requires at least one pattern to determine the number of values to expect.

Examples:

> (match-define-values (a b) (values 1 2))
> b
2

procedure
(exn:misc:match? v) → boolean?
v : any/c

A predicate for the exception raised in the case of a match failure.

syntax
(failure-cont)

Continues matching as if the current pattern failed. Note that unlike use of the => form, this does not escape the current context, and thus should only be used in tail position with respect to the match form.

9.2 Extending match

syntax
(define-match-expander id proc-expr)
(define-match-expander id proc-expr proc-expr)

Binds id to a match expander.

The first proc-expr sub-expression must evaluate to a transformer that produces a pat for match. Whenever id appears as the beginning of a pattern, this transformer is given, at expansion time, a syntax object corresponding to the entire pattern (including id). The pattern is replaced with the result of the transformer.

A transformer produced by a second proc-expr sub-expression is used when id is used in an expression context. Using the second proc-expr, id can be given meaning both inside and outside patterns.

Match expanders are not invoked unless id appears in the first position in a sequence. Instead, identifiers bound by define-match-expander are used as binding identifiers (like any other identifier) when they appear anywhere except the first position in a sequence.

For example, to extend the pattern matcher and destructure syntax lists,

(define (syntax-list? x)
  (and (syntax? x)
       (list? (syntax->list x))))
(define-match-expander syntax-list
  (lambda (stx)
    (syntax-case stx ()
      [(_ elts ...)
       #'(? syntax-list?
            (app syntax->list (list elts ...)))])))
(define (make-keyword-predicate keyword)
  (lambda (stx)
    (and (identifier? stx)
         (free-identifier=? stx keyword))))
(define or-keyword? (make-keyword-predicate #'or))
(define and-keyword? (make-keyword-predicate #'and))

> (match #'(or 3 4)
    [(syntax-list (? or-keyword?) b c)
     (list "OOORRR!" b c)]
    [(syntax-list (? and-keyword?) b c)
     (list "AAANND!" b c)])
'("OOORRR!" #<syntax:59:0 3> #<syntax:59:0 4>)
> (match #'(and 5 6)
    [(syntax-list (? or-keyword?) b c)
     (list "OOORRR!" b c)]
    [(syntax-list (? and-keyword?) b c)
     (list "AAANND!" b c)])
'("AAANND!" #<syntax:60:0 5> #<syntax:60:0 6>)

And here is an example showing how define-match-expander-bound identifiers are not treated specially unless they appear in the first position of pattern sequence.

(define-match-expander nil
  (λ (stx) #''())
  (λ (stx) #''()))
(define (len l)
  (match l
    [nil 0]
    [(cons hd tl) (+ 1 (len tl))]))

> (len nil)
0
> (len (cons 1 nil))
0
> (len (cons 1 (cons 2 nil)))
0

value
prop:match-expander : struct-type-property?

A structure type property to identify structure types that act as match expanders like the ones created by define-match-expander.

The property value must be an exact non-negative integer or a procedure of one or two arguments. In the former case, the integer designates a field within the structure that should contain a procedure; the integer must be between 0 (inclusive) and the number of non-automatic fields in the structure type (exclusive, not counting supertype fields), and the designated field must also be specified as immutable.

If the property value is a procedure of one argument, then the procedure serves as the transformer for match expansion. If the property value is a procedure of two arguments, then the first argument is the structure whose type has prop:match-expander property, and the second argument is a syntax object as for a match expander..

If the property value is a assignment transformer, then the wrapped procedure is extracted with set!-transformer-procedure before it is called.

This binding is provided for-syntax.

value
prop:legacy-match-expander : struct-type-property?

Like prop:match-expander, but for the legacy match syntax.

This binding is provided for-syntax.

procedure
(match-expander? v) → boolean?
v : any/c
procedure
(legacy-match-expander? v) → boolean?
v : any/c

Predicates for values which implement the appropriate match expander properties.

procedure
(syntax-local-match-introduce stx) → syntax?
stx : syntax?

Like syntax-local-introduce, but for match expanders.

parameter
(match-equality-test) → (any/c any/c . -> . any)
(match-equality-test comp-proc) → void?
comp-proc : (any/c any/c . -> . any)

A parameter that determines the comparison procedure used to check whether multiple uses of an identifier match the “same” value. The default is equal?.

syntax
(match/derived val-expr original-datum clause ...)
syntax
(match*/derived (val-expr ...) original-datum clause* ...)

Like match and match* respectively, but includes a sub-expression to be used as the source for all syntax errors within the form. For example, match-lambda expands to match/derived so that errors in the body of the form are reported in terms of match-lambda instead of match.

9.3 Library Extensions

syntax
(== val comparator)
(== val)

A match expander which checks if the matched value is the same as val when compared by comparator. If comparator is not provided, it defaults to equal?.

Examples:

> (match (list 1 2 3)
    [(== (list 1 2 3)) 'yes]
    [_ 'no])
'yes
> (match (list 1 2 3)
    [(== (list 1 2 3) eq?) 'yes]
    [_ 'no])
'no
> (match (list 1 2 3)
    [(list 1 2 (== 3 =)) 'yes]
    [_ 'no])
'yes

syntax
(struct* struct-id ([field pat] ...))

A match pattern form that matches an instance of a structure type named struct-id, where the field field in the instance matches the corresponding pat.

Any field of struct-id may be omitted, and such fields can occur in any order.

Examples:

(define-struct tree (val left right))

> (match (make-tree 0 (make-tree 1 #f #f) #f)
    [(struct* tree ([val a]
                    [left (struct* tree ([right #f] [val b]))]))
     (list a b)])
'(0 1)

top ← prev up next →

1	Language Model
2	Notation for Documentation
3	Syntactic Forms
4	Datatypes
5	Structures
6	Classes and Objects
7	Units
8	Contracts
9	Pattern Matching
10	Control Flow
11	Concurrency and Parallelism
12	Macros
13	Input and Output
14	Reflection and Security
15	Operating System
16	Memory Management
17	Unsafe Operations
18	Running Racket
	Bibliography
	Index

9.1	Additional Matching Forms
9.2	Extending match
9.3	Library Extensions