by Richard Kelsey
This copy of the SRFI 9 specification document is distributed as part of the Racket package srfi-doc.
The canonical source of this document is https://srfi.schemers.org/srfi-9/srfi-9.html.
This SRFI is currently in final status. Here is an explanation of each status that a SRFI can hold. To provide input on this SRFI, please send email to srfi-9@nospamsrfi.schemers.org. To subscribe to the list, follow these instructions. You can access previous messages via the mailing list archive.
This SRFI describes syntax for creating new data types, called record types. A predicate, constructor, and field accessors and modifiers are defined for each record type. Each new record type is distinct from all existing types, including other record types and Scheme's predefined types.
Many Scheme implementations provide means for creating new types,
usually called either records or structures.
The DEFINE-RECORD-TYPE syntax described here is a slight
simplification of one written for Scheme 48 by Jonathan Rees.
Unlike many record-defining macros or special forms, it
does not create any new identifiers.
Instead, the names of the
record type, predicate, constructor, and so on are all listed explicitly
in the source.
This has the following advantages:
SYNTAX-RULES macro
in Scheme implementations that provide a procedural interface
for creating record types.
grep and GNU Emacs's tag facility will see the
defining occurrence of each identifier.
The syntax of a record-type definition is:
<command or definition>
-> <record type definition> ; addition to 8.1.6 in R5RS
<record type definition>
-> (define-record-type <type name>
(<constructor name> <field tag> ...)
<predicate name>
<field spec> ...)
<field spec> -> (<field tag> <accessor name>)
-> (<field tag> <accessor name> <modifier name>)
<field tag> -> <identifier>
<... name> -> <identifier>
DEFINE-RECORD-TYPE is generative:
each use creates a new record type that is distinct from all existing types,
including other record types and Scheme's predefined types.
Record-type definitions may only occur at top-level (there are two possible semantics for `internal' record-type definitions, generative and nongenerative, and no consensus as to which is better).
An instance of DEFINE-RECORD-TYPE is equivalent to the following
definitions:
<type name> is bound to a representation of the record
type itself. Operations on record types, such as defining print
methods, reflection, etc. are left to other SRFIs.
<constructor name> is bound to a procedure that takes
as many arguments as there are <field tag>s in the
(<constructor name> ...)
subform and returns a new <type name> record.
Fields whose tags are listed with <constructor name>
have the corresponding argument as their
initial value. The initial values of all other fields are unspecified.
<predicate name> is a predicate that returns #T when
given a value returned by <constructor name> and #F
for everything else.
<accessor name> is a procedure that takes a record
of type <type name> and returns the current value of the
corresponding field.
It is an error to pass an accessor a value which is not a record of
the appropriate type.
<modifier name> is a procedure that takes a record
of type <type name> and a value which becomes the new
value of the corresponding field; an unspecified value is returned.
It is an error to pass a modifier a first
argument which is not a record of the appropriate type.
Records are disjoint from the types listed in Section 4.2 of R5RS.
Set!ing the value of any of these identifiers has no
effect on the behavior of any of their original values.
The following
(define-record-type :pare
(kons x y)
pare?
(x kar set-kar!)
(y kdr))
defines KONS to be a constructor, KAR and
KDR to be accessors, SET-KAR! to be a modifier,
and PARE? to be a predicate for :PAREs.
(pare? (kons 1 2)) --> #t
(pare? (cons 1 2)) --> #f
(kar (kons 1 2)) --> 1
(kdr (kons 1 2)) --> 2
(let ((k (kons 1 2)))
(set-kar! k 3)
(kar k)) --> 3
This code is divided into three layers. In top-down order these are:
DEFINE-RECORD-TYPE and an auxillary macro.
RECORD-SET! can be used
to modify the type of a record). Access to these procedures should be
restricted.
; Definition of DEFINE-RECORD-TYPE
(define-syntax define-record-type
(syntax-rules ()
((define-record-type type
(constructor constructor-tag ...)
predicate
(field-tag accessor . more) ...)
(begin
(define type
(make-record-type 'type '(field-tag ...)))
(define constructor
(record-constructor type '(constructor-tag ...)))
(define predicate
(record-predicate type))
(define-record-field type field-tag accessor . more)
...))))
; An auxilliary macro for define field accessors and modifiers.
; This is needed only because modifiers are optional.
(define-syntax define-record-field
(syntax-rules ()
((define-record-field type field-tag accessor)
(define accessor (record-accessor type 'field-tag)))
((define-record-field type field-tag accessor modifier)
(begin
(define accessor (record-accessor type 'field-tag))
(define modifier (record-modifier type 'field-tag))))))
; We define the following procedures:
;
; (make-record-type <type-name <field-names>) -> <record-type>
; (record-constructor <record-type<field-names>) -> <constructor>
; (record-predicate <record-type>) -> <predicate>
; (record-accessor <record-type <field-name>) -> <accessor>
; (record-modifier <record-type <field-name>) -> <modifier>
; where
; (<constructor> <initial-value> ...) -> <record>
; (<predicate> <value>) -> <boolean>
; (<accessor> <record>) -> <value>
; (<modifier> <record> <value>) -> <unspecific>
; Record types are implemented using vector-like records. The first
; slot of each record contains the record's type, which is itself a
; record.
(define (record-type record)
(record-ref record 0))
;----------------
; Record types are themselves records, so we first define the type for
; them. Except for problems with circularities, this could be defined as:
; (define-record-type :record-type
; (make-record-type name field-tags)
; record-type?
; (name record-type-name)
; (field-tags record-type-field-tags))
; As it is, we need to define everything by hand.
(define :record-type (make-record 3))
(record-set! :record-type 0 :record-type) ; Its type is itself.
(record-set! :record-type 1 ':record-type)
(record-set! :record-type 2 '(name field-tags))
; Now that :record-type exists we can define a procedure for making more
; record types.
(define (make-record-type name field-tags)
(let ((new (make-record 3)))
(record-set! new 0 :record-type)
(record-set! new 1 name)
(record-set! new 2 field-tags)
new))
; Accessors for record types.
(define (record-type-name record-type)
(record-ref record-type 1))
(define (record-type-field-tags record-type)
(record-ref record-type 2))
;----------------
; A utility for getting the offset of a field within a record.
(define (field-index type tag)
(let loop ((i 1) (tags (record-type-field-tags type)))
(cond ((null? tags)
(error "record type has no such field" type tag))
((eq? tag (car tags))
i)
(else
(loop (+ i 1) (cdr tags))))))
;----------------
; Now we are ready to define RECORD-CONSTRUCTOR and the rest of the
; procedures used by the macro expansion of DEFINE-RECORD-TYPE.
(define (record-constructor type tags)
(let ((size (length (record-type-field-tags type)))
(arg-count (length tags))
(indexes (map (lambda (tag)
(field-index type tag))
tags)))
(lambda args
(if (= (length args)
arg-count)
(let ((new (make-record (+ size 1))))
(record-set! new 0 type)
(for-each (lambda (arg i)
(record-set! new i arg))
args
indexes)
new)
(error "wrong number of arguments to constructor" type args)))))
(define (record-predicate type)
(lambda (thing)
(and (record? thing)
(eq? (record-type thing)
type))))
(define (record-accessor type tag)
(let ((index (field-index type tag)))
(lambda (thing)
(if (and (record? thing)
(eq? (record-type thing)
type))
(record-ref thing index)
(error "accessor applied to bad value" type tag thing)))))
(define (record-modifier type tag)
(let ((index (field-index type tag)))
(lambda (thing value)
(if (and (record? thing)
(eq? (record-type thing)
type))
(record-set! thing index value)
(error "modifier applied to bad value" type tag thing)))))
; This implements a record abstraction that is identical to vectors,
; except that they are not vectors (VECTOR? returns false when given a
; record and RECORD? returns false when given a vector). The following
; procedures are provided:
; (record? <value>) -> <boolean>
; (make-record <size>) -> <record>
; (record-ref <record> <index>) -> <value>
; (record-set! <record> <index> <value>) -> <unspecific>
;
; These can implemented in R5RS Scheme as vectors with a distinguishing
; value at index zero, providing VECTOR? is redefined to be a procedure
; that returns false if its argument contains the distinguishing record
; value. EVAL is also redefined to use the new value of VECTOR?.
; Define the marker and redefine VECTOR? and EVAL.
(define record-marker (list 'record-marker))
(define real-vector? vector?)
(define (vector? x)
(and (real-vector? x)
(or (= 0 (vector-length x))
(not (eq? (vector-ref x 0)
record-marker)))))
; This won't work if ENV is the interaction environment and someone has
; redefined LAMBDA there.
(define eval
(let ((real-eval eval))
(lambda (exp env)
((real-eval `(lambda (vector?) ,exp))
vector?))))
; Definitions of the record procedures.
(define (record? x)
(and (real-vector? x)
(< 0 (vector-length x))
(eq? (vector-ref x 0)
record-marker)))
(define (make-record size)
(let ((new (make-vector (+ size 1))))
(vector-set! new 0 record-marker)
new))
(define (record-ref record index)
(vector-ref record (+ index 1)))
(define (record-set! record index value)
(vector-set! record (+ index 1) value))
Copyright (C) Richard Kelsey (1999). All Rights Reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.