The racket/sandbox module provides utilities for
creating “sandboxed” evaluators, which are configured in a
particular way and can have restricted resources (memory and time),
filesystem and network access, and much more. Sandboxed evaluators can be
configured through numerous parameters —
(make-evaluator language input-program ... [ #:requires requires #:allow-for-require allow-for-require #:allow-for-load allow-for-load #:allow-read allow-read #:allow-syntactic-requires allow-syntactic-requires]) → (any/c . -> . any)
(or/c module-path? (list/c 'special symbol?) (cons/c 'begin list?)) input-program : any/c
(listof (or/c module-path? path-string? (cons/c 'for-syntax (listof module-path?)))) = null allow-for-require : (listof (or/c module-path? path?)) = null allow-for-load : (listof path-string?) = null allow-read : (listof (or/c module-path? path-string?)) = null
allow-syntactic-requires : (or/c #f (listof module-path?)) = #f
(make-module-evaluator module-decl [ #:language lang #:readers readers #:allow-for-require allow-for-require #:allow-for-load allow-for-load #:allow-read allow-read #:allow-syntactic-requires allow-syntactic-requires]) → (any/c . -> . any) module-decl : (or/c syntax? pair? path? input-port? string? bytes?) lang : (or/c #f module-path?) = #f
readers : (or/c #f (listof module-path?)) = (and lang (default-language-readers lang)) allow-for-require : (listof (or/c module-path? path?)) = null allow-for-load : (listof path-string?) = null allow-read : (listof (or/c module-path? path-string?)) = null
allow-syntactic-requires : (or/c #f (listof module-path?)) = #f
The returned evaluator operates in an isolated and limited environment. In particular, filesystem access is restricted, which may interfere with using modules from the filesystem that are not in a collection. See below for information on the allow-for-require, allow-for-load, and allow-read arguments; collection-based module files typically do not need to be included in those lists. When language is a module path or when requires is provided, the indicated modules are implicitly included in the allow-for-require list. When allow-syntactic-requires is not #f, it constraints the set of modules that can be directly referenced in a module; see below for more information. (For backward compatibility, non-module-path? path strings are allowed in arguments like requires; they are implicitly converted to paths before addition to allow-for-require.)
Each input-program or module-decl argument provides a program in one of the following forms:
an input port used to read the program;
a string or a byte string holding the complete input;
a path that names a file holding the input; or
In the first three cases above, the program is read using sandbox-reader, with line-counting enabled for sensible error messages, and with 'program as the source (used for testing coverage). In the last case, the input is expected to be the complete program, and is converted to a syntax object (using 'program as the source), unless it already is a syntax object.
The returned evaluator function accepts additional expressions (each time it is called) in essentially the same form: a string or byte string holding a sequence of expressions, a path for a file holding expressions, an S-expression, or a syntax object. If the evaluator receives an eof value, it is terminated and raises errors thereafter. See also kill-evaluator, which terminates the evaluator without raising an exception.
For make-evaluator, multiple input-programs are effectively concatenated to form a single program. The way that the input-programs are evaluated depends on the language argument:
The language argument can be a module path (i.e., a datum that matches the grammar for module-path of require).
In this case, the input-programs are automatically wrapped in a module, and the resulting evaluator works within the resulting module’s namespace.
The language argument can be a list starting with 'special, which indicates a built-in language with special input configuration. The possible values are '(special r5rs) or a value indicating a teaching language: '(special beginner), '(special beginner-abbr), '(special intermediate), '(special intermediate-lambda), or '(special advanced).
In this case, the input-programs are automatically wrapped in a module, and the resulting evaluator works within the resulting module’s namespace. In addition, certain parameters (such as such as read-accept-infix-dot) are set to customize reading programs from strings and ports.
This option is provided mainly for older test systems. Using make-module-evaluator with input starting with #lang is generally better.
Finally, language can be a list whose first element is 'begin.
In this case, a new namespace is created using sandbox-namespace-specs, which by default creates a new namespace using sandbox-make-namespace (which, in turn, uses make-base-namespace or make-gui-namespace depending on sandbox-gui-available and gui-available?).
In the new namespace, language is evaluated as an expression to further initialize the namespace.
The requires list adds additional imports to the module or namespace for the input-programs, even in the case that require is not made available through the language. The allow-syntactic-requires argument, if non-#f, constrains require references expanded in the module when the language argument implies a module wrapper; more precisely, it constrains the module paths that can be resolved when a syntax object is provided to the module name resolver, which will include require forms that are created by macro expansion. A relative-submodule path using submod followed by either "." or ".." is always allowed.
The following examples illustrate the difference between an evaluator that puts the program in a module and one that merely initializes a top-level namespace:
> (define base-module-eval ; a module cannot have free variables... (make-evaluator 'racket/base '(define (f) later)))
program:1:0: later: unbound identifier
> (define base-module-eval (make-evaluator 'racket/base '(define (f) later) '(define later 5))) > (base-module-eval '(f))
> (define base-top-eval ; non-module code can have free variables: (make-evaluator '(begin) '(define (f) later))) > (base-top-eval '(+ 1 2))
> (base-top-eval '(define later 5)) > (base-top-eval '(f))
The make-module-evaluator function is essentially a restriction of make-evaluator, where the program must be a module, and all imports are part of the program. In some cases it is useful to restrict the program to be a module using a specific module in its language position; use the optional lang argument to specify such a restriction, where #f means that no restriction is enforced. The readers argument similarly constrains the paths that can follow #lang or #reader if it is not #f, and the default is based on lang. The allow-syntactic-requires argument is treated the same as for make-evaluator in the module-wrapper case.
When the program is specified as a path, then the path is implicitly added to the allow-for-load list.
(define base-module-eval2 ; equivalent to base-module-eval: (make-module-evaluator '(module m racket/base (define (f) later) (define later 5))))
The make-module-evaluator function can be convenient for testing module files: pass in a path value for the file name, and you get back an evaluator in the module’s context which you can use with your favorite test facility.
The evaluator works under the sandbox-security-guard, which restricts file system and network access.
The evaluator is contained in a memory-restricted environment, and each evaluation is wrapped in a call-with-limits (when memory accounting is available); see also sandbox-memory-limit, sandbox-eval-limits and set-eval-limits.
The allow-for-require and allow-for-load arguments adjust filesystem permissions to extend the set of files that are usable by the evaluator. Modules that are in a collection are automatically accessible, but the allow-for-require argument lists additional modules that can be required along with their imports (transitively) through a filesystem path. The allow-for-load argument similarly lists files that can be loaded. (The precise permissions needed for require versus load can differ.) The allow-read argument is for backward compatibility, only; each module-path? element of allow-read is effectively moved to allow-for-require, while other elements are moved to allow-for-load.
If the value of sandbox-propagate-exceptions is true (the default) when the sandbox is created, then exceptions (both syntax and run-time) are propagated as usual to the caller of the evaluation function (i.e., catch them with with-handlers). See below for a caveat about using raised exceptions directly. If the value of sandbox-propagate-exceptions is #f when the sandbox is created, then uncaught exceptions in a sandbox evaluation cause the error to be printed to the sandbox’s error port, and the caller of the evaluation receives #<void>.
Take care when using a value returned from a sandbox or raised as an exception by a sandbox. The value might by an impersonator, or it might be a structure whose structure type redirects equality comparisons or printing operations. To safely handle an unknown value produced by a sandbox, manipulate it within the sandbox, possibly using call-in-sandbox-context.
An evaluator can be used only by one thread at a time, and detected concurrent use triggers an exception. Beware of using an evaluator in a non-main thread, because the default value of sandbox-make-plumber registers a callback in the current plumber to flush the evaluator’s plumber, and that means a flush of the current plumber (such as when the Racket process is about to exit) implies a use of the evaluator.
Changed in version 1.2 of package sandbox-lib: Added the #:readers and #:allow-syntactic-require arguments.
v : any/c (exn:fail:sandbox-terminated-reason exn) → symbol? exn : exn:fail:sandbox-terminated?
Although the sandbox is designed to provide a safe environment for executing Racket programs with restricted access to system resources, executing untrusted programs in a sandbox still carries some risk. Because a malicious program can exercise arbitrary functionality from the Racket runtime and installed collections, an attacker who identifies a vulnerability in Racket or an installed collection may be able to escape the sandbox.
If untrusted code needs access to installed collections, installing only the collections required by your program.
Using operating-system-level security features to provide defense-in-depth in case the process running the sandbox is compromised.
Making sure your Racket installation and installed packages are up-to-date with the latest release.
The sandboxed evaluators that make-evaluator creates can be customized via many parameters. Most of the configuration parameters affect newly created evaluators; changing them has no effect on already-running evaluators.
The default configuration options are set for a very restricted
sandboxed environment —
The sandbox environment uses two notions of restricting the time that evaluations takes: shallow time and deep time. Shallow time refers to the immediate execution of an expression. For example, a shallow time limit of five seconds would restrict (sleep 6) and other computations that take longer than five seconds. Deep time refers to the total execution of the expression and all threads and sub-processes that the expression creates. For example, a deep time limit of five seconds would restrict (thread (λ () (sleep 6))), which shallow time would not, as well as all expressions that shallow time would restrict. By default, most sandboxes only restrict shallow time to facilitate expressions that use threads.
(sandbox-reader proc) → void? proc : (any/c . -> . any)
(or/c #f string? bytes? input-port? 'pipe (-> input-port?)) (sandbox-input in) → void?
(or/c #f string? bytes? input-port? 'pipe (-> input-port?))
an input port;
the symbol 'pipe, which triggers the creation of a pipe, where put-input can return the output end of the pipe or write directly to it;
a thunk, which is called to obtain a port (e.g., using current-input-port means that the evaluator input is the same as the calling context’s input).
(or/c #f output-port? 'pipe 'bytes 'string (-> output-port?)) (sandbox-output in) → void?
(or/c #f output-port? 'pipe 'bytes 'string (-> output-port?))
an output port, which is used as-is;
the symbol 'bytes, which causes get-output to return the complete output as a byte string as long as the evaluator has not yet terminated (so that the size of the bytes can be charged to the evaluator);
the symbol 'string, which is similar to 'bytes, but makes get-output produce a string;
the symbol 'pipe, which triggers the creation of a pipe, where get-output returns the input end of the pipe;
a thunk, which is called to obtain a port (e.g., using current-output-port means that the evaluator output is not diverted).
(or/c #f output-port? 'pipe 'bytes 'string (-> output-port?)) (sandbox-error-output in) → void?
(or/c #f output-port? 'pipe 'bytes 'string (-> output-port?))
(sandbox-coverage-enabled enabled?) → void? enabled? : any/c
The default value is #f.
(sandbox-propagate-breaks propagate?) → void? propagate? : any/c
(sandbox-propagate-exceptions propagate?) → void? propagate? : any/c
(cons/c (-> namespace?) (listof module-path?)) (sandbox-namespace-specs spec) → void?
(cons/c (-> namespace?) (listof module-path?))
The module paths are needed for sharing module instantiations between the sandbox and the caller. For example, sandbox code that returns posn values (from the lang/posn module) will not be recognized as such by your own code by default, since the sandbox will have its own instance of lang/posn and thus its own struct type for posns. To be able to use such values, include 'lang/posn in the list of module paths.
When testing code that uses a teaching language, the following piece of code can be helpful:
(sandbox-namespace-specs (let ([specs (sandbox-namespace-specs)]) `(,(car specs) ,@(cdr specs) lang/posn ,@(if (gui-available?) '(mrlib/cache-image-snip) '()))))
Various aspects of the library change when the GUI library is available, such as using a new eventspace for each evaluator.
(sandbox-override-collection-paths paths) → void? paths : (listof path-string?)
→ (or/c security-guard? (-> security-guard?)) (sandbox-security-guard guard) → void? guard : (or/c security-guard? (-> security-guard?))
The access mode symbol is one of: 'execute, 'write, 'delete, 'read, or 'exists. These symbols are in decreasing order: each implies access for the following modes too (e.g., 'read allows reading or checking for existence).
The path regexp is used to identify paths that are granted access. It can also be given as a path (or a string or a byte string), which is (made into a complete path, cleansed, simplified, and then) converted to a regexp that allows the path and sub-directories; e.g., "/foo/bar" applies to "/foo/bar/baz".
An additional mode symbol, 'read-bytecode, is not part of the
linear order of these modes. Specifying this mode is similar to
specifying 'read, but it is not implied by any other mode.
(For example, even if you specify 'write for a certain path,
you need to also specify 'read-bytecode to grant this
permission.) The sandbox usually works in the context of a lower code
inspector (see sandbox-make-code-inspector) which prevents
loading of untrusted bytecode files —
The default value is null, but when an evaluator is created, it is augmented by 'read-bytecode permissions that make it possible to use collection libraries (including sandbox-override-collection-paths). See make-evaluator for more information.
(symbol? (or/c (and/c string? immutable?) #f) (or/c (integer-in 1 65535) #f) (or/c 'server 'client) . -> . any) (sandbox-network-guard proc) → void?
(symbol? (or/c (and/c string? immutable?) #f) (or/c (integer-in 1 65535) #f) (or/c 'server 'client) . -> . any)
(sandbox-exit-handler handler) → void? handler : (any/c . -> . any)
(sandbox-memory-limit limit) → void? limit : (or/c (>=/c 0) #f)
Note that (when memory accounting is enabled) memory is attributed to the highest custodian that refers to it. This means that if you inspect a value that sandboxed evaluation returns outside of the sandbox, your own custodian will be charged for it. To ensure that it is charged back to the sandbox, you should remove references to such values when the code is done inspecting it.
(define e (make-evaluator 'racket/base)) (e '(define a 1)) (e '(for ([i (in-range 20)]) (set! a (cons (make-bytes 500000) a))))
When limits are set, call-with-limits (see below) is wrapped around each use of the evaluator, so consuming too much time or memory results in an exception. Change the limits of a running evaluator using set-eval-limits.
A custodian’s limit is checked only after a garbage collection, except that it may also be checked during certain large allocations that are individually larger than the custodian’s limit.
if a global limit is set but no per-evaluation limit, the sandbox will eventually be terminated and no further evaluations possible;
if there is a per-evaluation limit, but no global limit, the evaluation will abort with an error and it can be used again —
specifically, a will still hold a number of blocks, and you can evaluate the same expression again which will add more blocks to it;
if both limits are set, with the global one larger than the per-evaluation limit, then the evaluation will abort and you will be able to repeat it, but doing so several times will eventually terminate the sandbox (this will be indicated by the error message, and by the evaluator-alive? predicate).
(sandbox-run-submodules submod-syms) → void? submod-syms : (list/c symbol?)
(sandbox-make-inspector make) → void? make : (-> inspector?)
(sandbox-make-code-inspector make) → void? make : (-> inspector?)
The current-load/use-compiled handler is setup to allow loading of bytecode files under the original code inspector when sandbox-path-permissions allows it through a 'read-bytecode mode symbol, which makes loading libraries possible.
(sandbox-make-plumber make) → void? make : (or/c (-> plumber?) 'propagate)
If the value is 'propagate (the default), then a new plumber is created, and a flush callback is added to the current plumber to propagate the request to the new plumber within the created sandbox (if the sandbox has not already terminated).
Added in version 188.8.131.52 of package sandbox-lib.
→ (-> environment-variables?) (sandbox-make-environment-variables make) → void? make : (-> environment-variables?)
This default list includes the following (and more paths may be added in the future):
`(submod ,lang reader)
’lang/lang/reader if lang is a symbol
the module path producing by adding the relative path "lang/reader.rkt" to lang if lang is not a symbol
'(submod at-exp reader)
Added in version 1.2 of package sandbox-lib.
The following functions are used to interact with a sandboxed evaluator in addition to using it to evaluate code.
(One use for this custodian is with current-memory-use, where the per-interaction sub-custodians will not be charged with the memory for the whole sandbox.)
evaluator : (any/c . -> . any) secs : (or/c exact-nonnegative-integer? #f) mb : (or/c exact-nonnegative-integer? #f)
This procedure should be used to modify an existing evaluator handler, because changing the sandbox-eval-handlers parameter does not affect existing evaluators. See also call-with-custodian-shutdown and call-with-killing-threads for two useful handlers that are provided.
if it was 'pipe, then get-output returns the input port end of the created pipe;
if it was 'bytes or 'string, then the result is the accumulated output, and the output port is reset so each call returns a different piece of the evaluator’s output (note that results are available only until the evaluator has terminated, and any allocations of the output are subject to the sandbox memory limit);
otherwise, it returns #f.
The prog? argument specifies whether to obtain expressions that were uncovered after only the original input program was evaluated (#t) or after all later uses of the evaluator (#f). Using #t retrieves a list that is saved after the input program is evaluated, and before the evaluator is used, so the result is always the same.
A #t value of prog? is useful for testing student programs to find out whether a submission has sufficient test coverage built in. A #f value is useful for writing test suites for a program to ensure that your tests cover the whole code.
The second optional argument, src, specifies that the result should be filtered to hold only syntax objects whose source matches src. The default is the source that was used in the program code, if there was one. Note that 'program is used as the source value if the input program was given as S-expressions or as a string (and in these cases it will be the default for filtering). If given #f, the result is the unfiltered list of expressions.
The resulting list of syntax objects has at most one expression for each position and span. Thus, the contents may be unreliable, but the position information is reliable (i.e., it always indicates source code that would be painted red in DrRacket when coverage information is used).
Note that if the input program is a sequence of syntax values, either make sure that they have 'program as the source field, or use the src argument. Using a sequence of S-expressions (not syntax objects) for an input program leads to unreliable coverage results, since each expression may be assigned a single source location.
This process is usually similar to (evaluator (list thunk)), except that it does not rely on the common meaning of a sexpr-based syntax with list expressions as function application (which is not true in all languages). Note that this is more useful for meta-level operations such as namespace manipulation, it is not intended to be used as a safe-evaluation replacement (i.e., using the sandbox evaluator as usual).
(let ([guard (current-security-guard)]) (call-in-sandbox-context ev (lambda () (parameterize ([current-security-guard guard]) ; can access anything you want here (delete-file "/some/file")))))
secs : (or/c exact-nonnegative-integer? #f) mb : (or/c exact-nonnegative-integer? #f) thunk : (-> any)
To enforce limits, thunk is run in a new thread. As usual, the new thread starts with the same parameter values as the one that calls call-with-limits. Not as usual, parameter values from the thread used to run thunk are copied back to the thread that called call-with-limits when thunk completes.
Sandboxed evaluators use call-with-limits, according to the sandbox-eval-limits setting and uses of set-eval-limits: each expression evaluation is protected from timeouts and memory problems. Use call-with-limits directly only to limit a whole testing session, instead of each expression.
(with-limits sec-expr mb-expr body ...)
secs : exact-nonnegative-integer? thunk : (-> any)
The given thunk is run in a new thread. If it errors or if the thread terminates returning a value, then (values) is returned.
Changed in version 1.1 of package sandbox-lib: Changed to return thunk’s result if it completes normally.
(with-deep-time-limit secs-expr body ...)
v : any/c (exn:fail:resource-resource exn) → (or/c 'time 'memory 'deep-time) exn : exn:fail:resource?