10.1 Threads
See Threads for basic information on the Racket
thread model. See also Futures.
When a thread is created, it is placed into the management of the
current custodian and added to the current thread
group. A thread can have any number of custodian managers added
through thread-resume.
A thread that has not terminated can be garbage collected (see
Garbage Collection) if it is unreachable and suspended or if it is
unreachable and blocked on only unreachable events through
semaphore-wait, semaphore-wait/enable-break,
channel-put, channel-get, sync,
sync/enable-break, or thread-wait.
In GRacket, a handler thread for an eventspace is blocked on
an internal semaphore when its event queue is empty. Thus, the handler
thread is collectible when the eventspace is unreachable and contains
no visible windows or running timers.
All constant-time procedures and operations provided by Racket are
thread-safe because they are atomic. For example,
set! assigns to a variable as an atomic action with respect
to all threads, so that no thread can see a “half-assigned”
variable. Similarly, vector-set! assigns to a vector
atomically. The hash-set! procedure is not atomic, but
the table is protected by a lock; see Hash Tables for more
information. Port operations are generally not atomic, but they are
thread-safe in the sense that a byte consumed by one thread from an
input port will not be returned also to another thread, and procedures
like port-commit-peeked and write-bytes-avail offer
specific concurrency guarantees.
10.1.1 Creating Threads
Calls
thunk with no arguments in a new thread of control. The
thread procedure returns immediately with a
thread
descriptor value. When the invocation of
thunk returns, the
thread created to invoke
thunk terminates.
Creates a nested thread managed by
cust to execute
thunk. (The nested thread’s current custodian is inherited
from the creating thread, independent of the
cust argument.)
The current thread blocks until
thunk returns, and the result
of the
call-in-nested-thread call is the result returned by
thunk.
The nested thread’s exception handler is initialized to a procedure
that jumps to the beginning of the thread and transfers the exception
to the original thread. The handler thus terminates the nested thread
and re-raises the exception in the original thread.
If the thread created by call-in-nested-thread dies before
thunk returns, the exn:fail exception is raised in the original
thread. If the original thread is killed before thunk
returns, a break is queued for the nested thread.
If a break is queued for the original thread (with
break-thread) while the nested thread is running, the break
is redirected to the nested thread. If a break is already queued on
the original thread when the nested thread is created, the break is
moved to the nested thread. If a break remains queued on the nested
thread when it completes, the break is moved to the original thread.
10.1.2 Suspending, Resuming, and Killing Threads
Immediately suspends the execution of
thd if it is
running. If the thread has terminated or is already suspended,
thread-suspend has no effect. The thread remains suspended
(i.e., it does not execute) until it is resumed with
thread-resume. If the
current custodian does not
manage
thd (and none of its subordinates manages
thd), the
exn:fail:contract exception is raised, and the thread is not
suspended.
Resumes the execution of
thd if it is suspended and has at
least one custodian (possibly added through
benefactor, as
described below). If the thread has terminated, or if the thread is
already running and
benefactor is not supplied, or if the
thread has no custodian and
benefactor is not supplied, then
thread-resume has no effect. Otherwise, if
benefactor is supplied, it triggers up to three
additional actions:
If benefactor is a thread, whenever it is resumed
from a suspended state in the future, then thd is also
resumed. (Resuming thd may trigger the resumption of other
threads that were previously attached to thd through
thread-resume.)
New custodians may be added to thd’s set of
managers. If benefactor is a thread, then all of the
thread’s custodians are added to thd. Otherwise,
benefactor is a custodian, and it is added to thd
(unless the custodian is already shut down). If thd
becomes managed by both a custodian and one or more of its
subordinates, the redundant subordinates are removed from
thd. If thd is suspended and a custodian is
added, then thd is resumed only after the addition.
If benefactor is a thread, whenever it receives a
new managing custodian in the future, then thd also
receives the custodian. (Adding custodians to thd may
trigger adding the custodians to other threads that were previously
attached to thd through thread-resume.)
Terminates the specified thread immediately, or suspends the thread if
thd was created with
thread/suspend-to-kill. Terminating the main thread exits the
application. If
thd has already terminated,
kill-thread does nothing. If the
current custodian
does not manage
thd (and none of its subordinates manages
thd), the
exn:fail:contract exception is raised, and the thread is not
killed or suspended.
Unless otherwise noted, procedures provided by Racket (and GRacket) are
kill-safe and suspend-safe; that is, killing or suspending a thread
never interferes with the application of procedures in other
threads. For example, if a thread is killed while extracting a
character from an input port, the character is either completely
consumed or not consumed, and other threads can safely use the port.
Registers a break with the specified
thread. If breaking is disabled in
thd, the break will be
ignored until breaks are re-enabled (see
Breaks).
| (sleep [secs]) → void? |
| secs : nonnegative-number? = 0 |
Causes the current thread to sleep until at least secs
seconds have passed after it starts sleeping. A zero value for
secs simply acts as a hint to allow other threads to
execute. The value of secs can be a non-integer to request a
sleep duration to any precision; the precision of the actual sleep
time is unspecified.
Returns
#t if
thd
has not terminated and is not suspended,
#f otherwise.
Returns #t if thd has terminated, #f
otherwise.
10.1.3 Synchronizing Thread State
Blocks execution of the current thread until
thd has
terminated. Note that
(thread-wait (current-thread))
deadlocks the current thread, but a break can end the deadlock (if
breaking is enabled; see
Breaks).
Returns a
synchronizable event (see
Events) that
becomes ready when
thd is running. (If
thd has
terminated, the event never becomes ready.) If
thd runs and
is then suspended after a call to
thread-resume-evt, the
result event remains ready; after each suspend of
thd a fresh
event is generated to be returned by
thread-resume-evt. The
result of the event is
thd, but if
thd is never
resumed, then reference to the event does not prevent
thd
from being garbage collected (see
Garbage Collection).
Returns a
synchronizable event (see
Events) that
becomes ready when
thd is suspended. (If
thd has
terminated, the event will never unblock.) If
thd is
suspended and then resumes after a call to
thread-suspend-evt, the result event remains ready; after
each resume of
thd created a fresh event to be returned by
thread-suspend-evt.
10.1.4 Thread Mailboxes
Each thread has a mailbox through which it can receive
arbitrary message. In other words, each thread has a built-in
asynchronous channel.
See also Buffered Asynchronous Channels.
Queues
v as a message to
thd without blocking. If
the message is queued, the result is
#<void>. If
thd
stops running—
as in
thread-running?—
before the message is
queued, then
fail-thunk is called (through a tail call) if it is
a procedure to produce the result, or
#f is returned if
fail-thunk is
#f.
Receives and dequeues a message queued for the current thread, if
any. If no message is available,
thread-receive blocks until
one is available.
Receives and dequeues a message queued for the current thread, if any,
or returns #f immediately if no message is available.
Returns a constant
synchronizable event (see
Events)
that becomes ready when the synchronizing thread has a message to
receive. The event result is the event itself.
Pushes the elements of lst back onto the front of the current
thread’s queue. The elements are pushed one by one, so that the first
available message is the last element of lst.